lkml.org 
[lkml]   [2023]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 1/8] i2c: add I2C Address Translator (ATR) support
Some inline comments below.

Regards
Matthias

Am 22.02.23 um 14:29 schrieb Tomi Valkeinen:
> From: Luca Ceresoli <luca@lucaceresoli.net>
>
> An ATR is a device that looks similar to an i2c-mux: it has an I2C
> slave "upstream" port and N master "downstream" ports, and forwards
> transactions from upstream to the appropriate downstream port. But it
> is different in that the forwarded transaction has a different slave
> address. The address used on the upstream bus is called the "alias"
> and is (potentially) different from the physical slave address of the
> downstream chip.
>
> Add a helper file (just like i2c-mux.c for a mux or switch) to allow
> implementing ATR features in a device driver. The helper takes care or
> adapter creation/destruction and translates addresses at each transaction.
>
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> ---
> Documentation/i2c/index.rst | 1 +
> Documentation/i2c/muxes/i2c-atr.rst | 97 +++++
> MAINTAINERS | 8 +
> drivers/i2c/Kconfig | 9 +
> drivers/i2c/Makefile | 1 +
> drivers/i2c/i2c-atr.c | 548 ++++++++++++++++++++++++++++
> include/linux/i2c-atr.h | 116 ++++++
> 7 files changed, 780 insertions(+)
> create mode 100644 Documentation/i2c/muxes/i2c-atr.rst
> create mode 100644 drivers/i2c/i2c-atr.c
> create mode 100644 include/linux/i2c-atr.h
>
[...]
> diff --git a/drivers/i2c/i2c-atr.c b/drivers/i2c/i2c-atr.c
> new file mode 100644
> index 000000000000..5ab890b83670
> --- /dev/null
> +++ b/drivers/i2c/i2c-atr.c
> @@ -0,0 +1,548 @@
[...]
> +
> +/*
> + * Replace all message addresses with their aliases, saving the original
> + * addresses.
> + *
> + * This function is internal for use in i2c_atr_master_xfer(). It must be
> + * followed by i2c_atr_unmap_msgs() to restore the original addresses.
> + */
> +static int i2c_atr_map_msgs(struct i2c_atr_chan *chan, struct i2c_msg *msgs,
> + int num)
> +{
> + struct i2c_atr *atr = chan->atr;
> + static struct i2c_atr_cli2alias_pair *c2a;
> + int i;
> +
> + /* Ensure we have enough room to save the original addresses */
> + if (unlikely(chan->orig_addrs_size < num)) {
> + u16 *new_buf;
> +
> + /* We don't care about old data, hence no realloc() */
> + new_buf = kmalloc_array(num, sizeof(*new_buf), GFP_KERNEL);
> + if (!new_buf)
> + return -ENOMEM;
> +
> + kfree(chan->orig_addrs);
> + chan->orig_addrs = new_buf;
> + chan->orig_addrs_size = num;
> + }
> +
> + for (i = 0; i < num; i++) {
> + chan->orig_addrs[i] = msgs[i].addr;
> +
> + c2a = i2c_atr_find_mapping_by_addr(&chan->alias_list,
> + msgs[i].addr);
> + if (!c2a) {
> + dev_err(atr->dev, "client 0x%02x not mapped!\n",
> + msgs[i].addr);
> + return -ENXIO;
I miss the roll-back of previously modified msgs[].addr values.

> + }
> +
> + msgs[i].addr = c2a->alias;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Restore all message address aliases with the original addresses. This
> + * function is internal for use in i2c_atr_master_xfer().
> + *
> + * @see i2c_atr_map_msgs()
> + */
> +static void i2c_atr_unmap_msgs(struct i2c_atr_chan *chan, struct i2c_msg *msgs,
> + int num)
> +{
> + int i;
> +
> + for (i = 0; i < num; i++)
> + msgs[i].addr = chan->orig_addrs[i];
Does this code needs null and size checks for orig_addrs/orig_addrs_size
to protect from oopses?
This cannot happen now as i2c_atr_master_xfer returns early when
i2c_atr_map_msgs fails.

> +}
> +
> +static int i2c_atr_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> + int num)
> +{
> + struct i2c_atr_chan *chan = adap->algo_data;
> + struct i2c_atr *atr = chan->atr;
> + struct i2c_adapter *parent = atr->parent;
> + int ret;
> +
> + /* Translate addresses */
> + mutex_lock(&chan->orig_addrs_lock);
> +
> + ret = i2c_atr_map_msgs(chan, msgs, num);
> + if (ret < 0)
> + goto err_unlock;
> +
> + /* Perform the transfer */
> + ret = i2c_transfer(parent, msgs, num);
> +
> + /* Restore addresses */
> + i2c_atr_unmap_msgs(chan, msgs, num);
> +
> +err_unlock:
> + mutex_unlock(&chan->orig_addrs_lock);
> +
> + return ret;
> +}
> +
[...]


\
 
 \ /
  Last update: 2023-03-27 01:07    [W:0.168 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site