Messages in this thread Patch in this message | | | From | Philippe Schenker <> | Subject | [PATCH v2 10/23] arm64: dts: colibri-imx8x: Add SPI | Date | Tue, 14 Mar 2023 11:23:56 +0100 |
| |
From: Philippe Schenker <philippe.schenker@toradex.com>
Add Colibri SPI to the board. lpspi2 is being exposed on the SoM edge. Add settings to the module-level but finally enable it on the eval-board dtsi.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> ---
(no changes since v1)
arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi | 5 +++++ arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 7 +++++++ 2 files changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi index dc0339b35a3c..1d0bad085ad4 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi @@ -36,6 +36,11 @@ rtc_i2c: rtc@68 { }; }; +/* Colibri SPI */ +&lpspi2 { + status = "okay"; +}; + /* Colibri UART_B */ &lpuart0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi index cd7de71c6d73..a2364845e976 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi @@ -91,6 +91,13 @@ ethphy0: ethernet-phy@2 { }; }; +/* Colibri SPI */ +&lpspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi2>; + cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>; +}; + /* On-module eMMC */ &usdhc1 { bus-width = <8>; -- 2.39.2
| |