Messages in this thread Patch in this message | | | From | Tudor Ambarus <> | Subject | [PATCH 09/13] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks | Date | Thu, 14 Dec 2023 10:52:39 +0000 |
| |
Get rid of the dummy clock and start using the cmu_peric0 clocks for the usi_uart and serial_0 nodes.
Tested the serial at 115200, 1000000 and 3000000 baudrates, everthing went fine.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index d0b0ad70c6ba..ffb7b4d89a8c 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -180,14 +180,6 @@ HERA_CPU_SLEEP: cpu-hera-sleep { }; }; - /* TODO replace with CCF clock */ - dummy_clk: clock-3 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12345>; - clock-output-names = "pclk"; - }; - /* ect node is required to be present by bootloader */ ect { }; @@ -369,7 +361,8 @@ usi_uart: usi@10a000c0 { ranges; #address-cells = <1>; #size-cells = <1>; - clocks = <&dummy_clk>, <&dummy_clk>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI0_UART>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1020>; samsung,mode = <USI_V2_UART>; @@ -381,7 +374,8 @@ serial_0: serial@10a00000 { reg-io-width = <4>; interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&dummy_clk 0>, <&dummy_clk 0>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI0_UART>; clock-names = "uart", "clk_uart_baud0"; samsung,uart-fifosize = <256>; status = "disabled"; -- 2.43.0.472.g3155946c3a-goog
| |