Messages in this thread Patch in this message | | | From | Jai Luthra <> | Subject | [PATCH v10 06/13] media: cadence: csi2rx: Configure DPHY using link freq | Date | Mon, 9 Oct 2023 18:39:32 +0530 |
| |
From: Pratyush Yadav <p.yadav@ti.com>
Some platforms like TI's J721E can have the CSI2RX paired with an external DPHY. Use the generic PHY framework to configure the DPHY with the correct link frequency.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Co-developed-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Jai Luthra <j-luthra@ti.com> --- drivers/media/platform/cadence/cdns-csi2rx.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c index f9b41451f4a4..77e2413c345a 100644 --- a/drivers/media/platform/cadence/cdns-csi2rx.c +++ b/drivers/media/platform/cadence/cdns-csi2rx.c @@ -145,8 +145,32 @@ static void csi2rx_reset(struct csi2rx_priv *csi2rx) static int csi2rx_configure_ext_dphy(struct csi2rx_priv *csi2rx) { union phy_configure_opts opts = { }; + struct phy_configure_opts_mipi_dphy *cfg = &opts.mipi_dphy; + struct v4l2_subdev_format sd_fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .pad = CSI2RX_PAD_SINK, + }; + const struct csi2rx_fmt *fmt; + s64 link_freq; int ret; + ret = v4l2_subdev_call_state_active(&csi2rx->subdev, pad, get_fmt, + &sd_fmt); + if (ret < 0) + return ret; + + fmt = csi2rx_get_fmt_by_code(sd_fmt.format.code); + + link_freq = v4l2_get_link_freq(csi2rx->source_subdev->ctrl_handler, + fmt->bpp, 2 * csi2rx->num_lanes); + if (link_freq < 0) + return link_freq; + + ret = phy_mipi_dphy_get_default_config_for_hsclk(link_freq, + csi2rx->num_lanes, cfg); + if (ret) + return ret; + ret = phy_power_on(csi2rx->dphy); if (ret) return ret; -- 2.42.0
| |