lkml.org 
[lkml]   [2023]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: dts: omap4-embt2ws: Add Bluetooth
* Tony Lindgren <tony@atomide.com> [231007 07:00]:
> * Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [231005 08:47]:
> > On 04/10/2023 09:03, Andreas Kemnade wrote:
> > > Since the required clock is now available, add bluetooth.
> > >
> > > Note: Firmware (bts file) from device vendor reroutes tx for some time
> > > during initialisation and later put it back, producing timeouts in
> > > bluetooth initialisation but ignoring that command leads to proper
> > > initialisation.
> > >
> > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> > > ---
> >
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> Applying into omap-for-v6.7/dt thanks.

Looks like this causes the following #clock-cells warning so dropping
this patch.

Regards,

Tony

arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts:457.17-462.4: Warning (clocks_property):
/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth-gnss:
Missing property '#clock-cells' in node /ocp/interconnect@48000000/segment@0/targe

\
 
 \ /
  Last update: 2023-10-07 09:25    [W:0.090 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site