lkml.org 
[lkml]   [2023]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/4] dt-bindings: soc: qcom: qcom,pmic-glink: add a gpio used to determine the Type-C port plug orientation
On Mon, Oct 02, 2023 at 12:20:21PM +0200, Neil Armstrong wrote:
> On SM8450 and SM8550 based platforms, the Type-C plug orientation is given on a
> GPIO line for each connector which are set by the PMIC(s).
>
> Document this optional Type-C connector property, and take the
> assumption an active level represents an inverted/flipped orientation.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
> index bceb479f74c5..422921cf1f82 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
> @@ -35,6 +35,12 @@ properties:
> '#size-cells':
> const: 0
>
> + orientation-gpios:
> + description: Array of input gpios for the Type-C connector orientation indication.
> + The GPIO indication is used to detect the orientation of the Type-C connector.
> + The array should contain a gpio entry for each PMIC Glink connector, in reg order.
> + It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.

Shouldn't this node then have 'orientation-switch'?

\
 
 \ /
  Last update: 2023-10-06 17:44    [W:0.146 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site