lkml.org 
[lkml]   [2023]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V3 3/4] thermal/drivers/tsens: Add support for IPQ5018 tsens
From

On 22. 09. 2023. 13:51, Sricharan R wrote:
> From: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>
> IPQ5018 has tsens IP V1.0, 4 sensors and 1 interrupt.
> The soc does not have a RPM, hence tsens has to be reset and
> enabled in the driver init. Adding the driver support for same.
>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
> [v3] Fixed Dmitry's comments for error checks in init_ipq5018
>
> drivers/thermal/qcom/tsens-v1.c | 60 +++++++++++++++++++++++++++++++++
> drivers/thermal/qcom/tsens.c | 3 ++
> drivers/thermal/qcom/tsens.h | 2 +-
> 3 files changed, 64 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index dc1c4ae2d8b0..acee2064f83e 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -79,6 +79,18 @@ static struct tsens_features tsens_v1_feat = {
> .trip_max_temp = 120000,
> };
>
> +static struct tsens_features tsens_v1_ipq5018_feat = {
> + .ver_major = VER_1_X,
> + .crit_int = 0,
> + .combo_int = 0,
> + .adc = 1,
> + .srot_split = 1,
> + .max_sensors = 11,
> + .trip_min_temp = -40000,
> + .trip_max_temp = 120000,
> + .ignore_enable = 1,
> +};
> +
> static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
> /* ----- SROT ------ */
> /* VERSION */
> @@ -150,6 +162,41 @@ static int __init init_8956(struct tsens_priv *priv) {
> return init_common(priv);
> }
>
> +static int init_ipq5018(struct tsens_priv *priv)

__init is missing after int, otherwise I get modpost warning while building:
WARNING: modpost: vmlinux: section mismatch in reference:
init_ipq5018+0x14 (section: .text) -> init_common (section: .init.text)

Regards,
Robert

> +{
> + int ret;
> + u32 mask;
> +
> + ret = init_common(priv);
> + if (ret < 0) {
> + dev_err(priv->dev, "Init common failed %d\n", ret);
> + return ret;
> + }
> +
> + ret = regmap_field_write(priv->rf[TSENS_SW_RST], 1);
> + if (ret) {
> + dev_err(priv->dev, "Reset failed\n");
> + return ret;
> + }
> +
> + mask = GENMASK(priv->num_sensors, 0);
> + ret = regmap_field_update_bits(priv->rf[SENSOR_EN], mask, mask);
> + if (ret) {
> + dev_err(priv->dev, "Sensor Enable failed\n");
> + return ret;
> + }
> +
> + ret = regmap_field_write(priv->rf[TSENS_EN], 1);
> + if (ret) {
> + dev_err(priv->dev, "Enable failed\n");
> + return ret;
> + }
> +
> + ret = regmap_field_write(priv->rf[TSENS_SW_RST], 0);
> +
> + return ret;
> +}
> +
> static const struct tsens_ops ops_generic_v1 = {
> .init = init_common,
> .calibrate = calibrate_v1,
> @@ -187,3 +234,16 @@ struct tsens_plat_data data_8976 = {
> .feat = &tsens_v1_feat,
> .fields = tsens_v1_regfields,
> };
> +
> +const struct tsens_ops ops_ipq5018 = {
> + .init = init_ipq5018,
> + .calibrate = tsens_calibrate_common,
> + .get_temp = get_temp_tsens_valid,
> +};
> +
> +struct tsens_plat_data data_ipq5018 = {
> + .num_sensors = 5,
> + .ops = &ops_ipq5018,
> + .feat = &tsens_v1_ipq5018_feat,
> + .fields = tsens_v1_regfields,
> +};
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 0a43ccf02ec4..c792b9dc6676 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -1101,6 +1101,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
>
> static const struct of_device_id tsens_table[] = {
> {
> + .compatible = "qcom,ipq5018-tsens",
> + .data = &data_ipq5018,
> + }, {
> .compatible = "qcom,ipq8064-tsens",
> .data = &data_8960,
> }, {
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index e254cd2df904..b6594b546d11 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -645,7 +645,7 @@ extern struct tsens_plat_data data_8960;
> extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8974, data_9607;
>
> /* TSENS v1 targets */
> -extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
> +extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956, data_ipq5018;
>
> /* TSENS v2 targets */
> extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;

\
 
 \ /
  Last update: 2023-10-04 21:11    [W:0.105 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site