lkml.org 
[lkml]   [2023]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v10 03/15] drivers: irqchip/riscv-intc: Mark all INTC nodes as initialized
Date
The RISC-V INTC local interrupts are per-HART (or per-CPU) so we
create INTC IRQ domain only for the INTC node belonging to the boot
HART. This means only the boot HART INTC node will be marked as
initialized and other INTC nodes won't be marked which results
downstream interrupt controllers (such as PLIC, IMSIC and APLIC
direct-mode) not being probed due to missing device suppliers.

To address this issue, we mark all INTC node for which we don't
create IRQ domain as initialized.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
drivers/irqchip/irq-riscv-intc.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 4adeee1bc391..e8d01b14ccdd 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -155,8 +155,16 @@ static int __init riscv_intc_init(struct device_node *node,
* for each INTC DT node. We only need to do INTC initialization
* for the INTC DT node belonging to boot CPU (or boot HART).
*/
- if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
+ if (riscv_hartid_to_cpuid(hartid) != smp_processor_id()) {
+ /*
+ * The INTC nodes of each CPU are suppliers for downstream
+ * interrupt controllers (such as PLIC, IMSIC and APLIC
+ * direct-mode) so we should mark an INTC node as initialized
+ * if we are not creating IRQ domain for it.
+ */
+ fwnode_dev_initialized(of_fwnode_handle(node), true);
return 0;
+ }

return riscv_intc_init_common(of_node_to_fwnode(node));
}
--
2.34.1
\
 
 \ /
  Last update: 2023-10-03 06:45    [W:0.121 / U:4.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site