lkml.org 
[lkml]   [2023]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: dts: amlogic: add libretech cottonwood support
On 03/10/2023 09:21, Jerome Brunet wrote:
>
> On Tue 03 Oct 2023 at 05:23, Christian Hewitt <christianshewitt@gmail.com> wrote:
>
>>> On 3 Oct 2023, at 1:15 am, Da Xue <da@lessconfused.com> wrote:
>>>
>>> On Tue, Oct 3, 2023 at 3:13 AM Jerome Brunet <jbrunet@baylibre.com> wrote:
>>>>
>>>>
>>>> On Mon 02 Oct 2023 at 18:45, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> On 02/10/2023 16:10, Jerome Brunet wrote:
>>>>>> Add support for the Libretech cottonwood board family.
>>>>>> These 2 boards are based on the same PCB, with an RPi B form factor.
>>>>>> The "Alta" board uses an a311d while the "Solitude" variant uses an
>>>>>> s905d3.
>>>>>> Co-developed-by: Da Xue <da.xue@libretech.co>
>>>>>> Signed-off-by: Da Xue <da.xue@libretech.co>
>>>>>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>>>>>> ---
>>>>>> arch/arm64/boot/dts/amlogic/Makefile | 2 +
>>>>>> .../amlogic/meson-g12b-a311d-libretech-cc.dts | 133 ++++
>>>>>> .../amlogic/meson-libretech-cottonwood.dtsi | 610 ++++++++++++++++++
>>>>>> .../amlogic/meson-sm1-s905d3-libretech-cc.dts | 89 +++
>>>>>> 4 files changed, 834 insertions(+)
>>>>>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
>>>>>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
>>>>>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
>>>>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile
>>>>>> b/arch/arm64/boot/dts/amlogic/Makefile
>>>>>> index 4ce401d17b63..cc8b34bd583d 100644
>>>>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>>>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>>>>> @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
>>>>>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-libretech-cc.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
>>>>>> @@ -73,6 +74,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
>>>>>> +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>>>>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
>>>>>> new file mode 100644
>>>>>> index 000000000000..fc890e235dbd
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
>>>>>> @@ -0,0 +1,133 @@
>>>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>>>> +/*
>>>>>> + * Copyright (c) 2023 BayLibre, SAS.
>>>>>> + * Author: Jerome Brunet <jbrunet@baylibre.com>
>>>>>> + */
>>>>>> +
>>>>>> +/dts-v1/;
>>>>>> +
>>>>>> +#include <dt-bindings/clock/g12a-clkc.h>
>>>>>> +#include "meson-g12b-a311d.dtsi"
>>>>>> +#include "meson-libretech-cottonwood.dtsi"
>>>>>> +
>>>>>> +/ {
>>>>>> + compatible = "libretech,aml-a311d-cc", "amlogic,a311d", "amlogic,g12b";
>>>>>> + model = "Libre Computer AML-A311D-CC Alta";
>>>>>> +
>>>>>> + vddcpu_a: regulator-vddcpu-a {
>>>>>> + compatible = "pwm-regulator";
>>>>>> + regulator-name = "VDDCPU_A";
>>>>>> + regulator-min-microvolt = <730000>;
>>>>>> + regulator-max-microvolt = <1011000>;
>>>>>> + regulator-boot-on;
>>>>>> + regulator-always-on;
>>>>>> + pwm-supply = <&dc_in>;
>>>>>> + pwms = <&pwm_ab 0 1250 0>;
>>>>>> + pwm-dutycycle-range = <100 0>;
>>>>>> + };
>>>>>> +
>>>>>> + sound {
>>>>>> + model = "Alta";
>>>>>
>>>>> I think those sound model properties should be coherent with the
>>>>> other Libre Computer boards:
>>>>> arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi: model = "LIBRETECH-PC";
>>>>> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts: model = "LIBRETECH-AC";
>>>>> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts: model = "LIBRETECH-CC-V2";
>>>>> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts: model = "LIBRETECH-CC";
>>>>
>>>> "LIBRETECH-CC-" leave very little room to play with
>>>> That's not really something that could have been anticipated 5+ years ago
>>>>
>>>
>>> I think the formal model name is best, maybe with LC prefix.
>>> eg. LC-AML-A311D-CC and LC-AML-S905D3-CC
>>
>> The first is valid. The second will be truncated to LC-AML-S905D3-C by the
>> alsa 15-character naming limit (mentioned below).
>>
>> So name/rename them to:
>>
>> LC-XXXXXXXXXXXX <= MAX SIZE (15 Chars)
>> LC-LEPOTATO
>> LC-LEPOTATO-V2
>> LC-LAFRITE
>> LC-TARTIFLETTE
>> LC-ALTA
>> LC-SOLITUDE
>>
>> Personally I think the plain codenames (no "LC-“) work best as they are all
>> distinctive. Whenever I see lists of the official board names they look/read
>> the same at first glance and then I have to spot-the-difference to tell them
>> apart.
>>
>> At the moment AFAIK these names are just cosmetic as there’s no Amlogic alsa
>> ucm confs using board model (only downstream confs based on driver name). So
>> IMHO rework the names now before the confs go upstream.
>>
>
> No they are not cosmetic. It can be used to match the card.
> Changing old names may break userspace.

We changed them already because there was a clash from the 15 characters max width,
but now it's different.

So I think it's time to start a new clean scheme for the future LC boards, so:
LC-ALTA
LC-SOLITUDE

seems ok for me.

Using LC-AML-A311D-CC and LC-AML-S905D3-CC goes beyond the 15 chars limit.

Neil

>
>> CH.
>>
>>> https://hub.libre.computer/t/libre-computer-board-naming-and-conventions/100
>>>
>>>>>
>>>>> It's ok to change the scheme since it's tried to keep the name under the 15 characters limit,
>>>>> will the next board keep this naming ?
>>>>
>>>> I don't know what the next board will be so I can hardly make any prediction
>>>> I'm open to suggestion if you prefer something else
>>>>
>>>>>
>>>>>
>>>>>> + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
>>>>>> + "TDMOUT_A IN 1", "FRDDR_B OUT 0",
>>>>>> + "TDMOUT_A IN 2", "FRDDR_C OUT 0",
>>>>>> + "TDM_A Playback", "TDMOUT_A OUT",
>>>>>> + "TDMOUT_B IN 0", "FRDDR_A OUT 1",
>>>>>> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
>>>>>> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
>>>>>> + "TDM_B Playback", "TDMOUT_B OUT",
>>>>>> + "TDMOUT_C IN 0", "FRDDR_A OUT 2",
>>>>>> + "TDMOUT_C IN 1", "FRDDR_B OUT 2",
>>>>>> + "TDMOUT_C IN 2", "FRDDR_C OUT 2",
>>>>>> + "TDM_C Playback", "TDMOUT_C OUT",
>>>>>> + "TDMIN_A IN 0", "TDM_A Capture",
>>>>>> + "TDMIN_B IN 0", "TDM_A Capture",
>>>>>> + "TDMIN_C IN 0", "TDM_A Capture",
>>>>>> + "TDMIN_A IN 3", "TDM_A Loopback",
>>>>>> + "TDMIN_B IN 3", "TDM_A Loopback",
>>>>>> + "TDMIN_C IN 3", "TDM_A Loopback",
>>>>>> + "TDMIN_A IN 1", "TDM_B Capture",
>>>>>> + "TDMIN_B IN 1", "TDM_B Capture",
>>>>>> + "TDMIN_C IN 1", "TDM_B Capture",
>>>>>> + "TDMIN_A IN 4", "TDM_B Loopback",
>>>>>> + "TDMIN_B IN 4", "TDM_B Loopback",
>>>>>> + "TDMIN_C IN 4", "TDM_B Loopback",
>>>>>> + "TDMIN_A IN 2", "TDM_C Capture",
>>>>>> + "TDMIN_B IN 2", "TDM_C Capture",
>>>>>> + "TDMIN_C IN 2", "TDM_C Capture",
>>>>>> + "TDMIN_A IN 5", "TDM_C Loopback",
>>>>>> + "TDMIN_B IN 5", "TDM_C Loopback",
>>>>>> + "TDMIN_C IN 5", "TDM_C Loopback",
>>>>>> + "TODDR_A IN 0", "TDMIN_A OUT",
>>>>>> + "TODDR_B IN 0", "TDMIN_A OUT",
>>>>>> + "TODDR_C IN 0", "TDMIN_A OUT",
>>>>>> + "TODDR_A IN 1", "TDMIN_B OUT",
>>>>>> + "TODDR_B IN 1", "TDMIN_B OUT",
>>>>>> + "TODDR_C IN 1", "TDMIN_B OUT",
>>>>>> + "TODDR_A IN 2", "TDMIN_C OUT",
>>>>>> + "TODDR_B IN 2", "TDMIN_C OUT",
>>>>>> + "TODDR_C IN 2", "TDMIN_C OUT",
>>>>>> + "Lineout", "ACODEC LOLP",
>>>>>> + "Lineout", "ACODEC LORP";
>>>>>> + };
>>>>>> +};
>>>>>> +

<snip>

\
 
 \ /
  Last update: 2023-10-03 09:39    [W:1.819 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site