Messages in this thread | | | Date | Tue, 24 Oct 2023 10:34:24 +0200 | Subject | Re: [PATCH v2 2/3] arm64: dts: qcom: pm8916: Add BMS and charger | From | Konrad Dybcio <> |
| |
On 10/23/23 08:20, Nikita Travkin wrote: > pm8916 contains some hardware blocks for battery powered devices: > > - VM-BMS: Battery voltage monitoring block. > - LBC: Linear battery charger. > > Add them to the pmic dtsi so the devices that make use of those blocks > can enable them. > > Signed-off-by: Nikita Travkin <nikita@trvn.ru> > --- > arch/arm64/boot/dts/qcom/pm8916.dtsi | 48 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi > index f4de86787743..4b2e8fb47d2d 100644 > --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi > @@ -41,6 +41,35 @@ watchdog { > }; > }; > > + pm8916_charger: charger@1000 { > + compatible = "qcom,pm8916-lbc"; > + reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>; > + reg-names = "chgr", "bat_if", "usb", "misc"; > + > + interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, > + <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>; > + interrupt-names = "vbat_det", > + "fast_chg", > + "chg_fail", > + "chg_done", > + "bat_pres", > + "temp_ok", > + "coarse_det", > + "usb_vbus", So, both the charger and the USBIN driver use the same irq? :/
Konrad
| |