Messages in this thread Patch in this message | | | From | Chris Packham <> | Subject | [PATCH v4 1/2] dt-bindings: i2c: mv64xxx: add reset-gpios property | Date | Wed, 25 Oct 2023 11:30:31 +1300 |
| |
Add reset-gpios and reset-duration-us properties to the marvell,mv64xxx-i2c binding. These can be used to describe hardware where a common reset GPIO is connected to all downstream devices on and I2C bus. This reset will be asserted then released before the downstream devices on the bus are probed.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> ---
Notes: Changes in v4: - Add r-by from Krzysztof Changes in v3: - Rename reset-delay-us to reset-duration-us to better reflect its purpose - Add default: for reset-duration-us - Add description: for reset-gpios Changes in v2: - Update commit message - Add reset-delay-us property
.../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index 461d1c9ee3f7..ecf5b279cfa4 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -70,6 +70,16 @@ properties: resets: maxItems: 1 + reset-gpios: + description: + GPIO pin providing a common reset for all downstream devices. This GPIO + will be asserted then released before the downstream devices are probed. + maxItems: 1 + + reset-duration-us: + description: Reset duration in us. + default: 1 + dmas: items: - description: RX DMA Channel -- 2.42.0
| |