lkml.org 
[lkml]   [2023]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool
    From
    On 10/13/23 02:02, Chen-Yu Tsai wrote:
    > Tentacruel and Tentacool are MT8186 based Chromebooks based on the
    > Krabby design.
    >
    > Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
    > convertible device with touchscreen and stylus.
    >
    > Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
    > device. It does not have a touchscreen or stylus.
    >
    > The two devices both have two variants. The difference is a second
    > source touchpad controller that shares the same address as the original,
    > but is incompatible.
    >
    > The extra SKU IDs for the Tentacruel devices map to different sensor
    > components attached to the Embedded Controller. These are not visible
    > to the main processor.
    >
    > Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
    > ---
    > arch/arm64/boot/dts/mediatek/Makefile | 4 +
    > .../dts/mediatek/mt8186-corsola-krabby.dtsi | 130 ++
    > .../mt8186-corsola-tentacool-sku327681.dts | 49 +
    > .../mt8186-corsola-tentacool-sku327683.dts | 26 +
    > .../mt8186-corsola-tentacruel-sku262144.dts | 44 +
    > .../mt8186-corsola-tentacruel-sku262148.dts | 28 +
    > .../boot/dts/mediatek/mt8186-corsola.dtsi | 1704 +++++++++++++++++
    > 7 files changed, 1985 insertions(+)
    > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
    > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
    > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
    > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
    > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
    > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
    >
    > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
    > index e6e7592a3645..442af61b1305 100644
    > --- a/arch/arm64/boot/dts/mediatek/Makefile
    > +++ b/arch/arm64/boot/dts/mediatek/Makefile
    > @@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
    > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
    > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
    > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
    > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
    > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
    > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
    > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
    > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
    > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
    > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
    > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
    > new file mode 100644
    > index 000000000000..0586c24f1e12
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
    > @@ -0,0 +1,130 @@
    > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
    > +/*
    > + * Copyright 2023 Google LLC
    > + */
    > +
    > +/dts-v1/;
    > +#include "mt8186-corsola.dtsi"
    > +#include <dt-bindings/gpio/gpio.h>
    > +
    > +/ {
    > + aliases {
    > + i2c4 = &i2c4;
    > + };
    > +};
    > +
    > +&dsi_out {
    > + remote-endpoint = <&ps8640_in>;
    > +};
    > +
    > +&i2c0 {
    > + clock-frequency = <400000>;
    > +
    > + ps8640: edp-bridge@8 {
    > + compatible = "parade,ps8640";
    > + reg = <0x8>;
    > + powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
    > + reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&ps8640_pins>;
    > + vdd12-supply = <&mt6366_vrf12_reg>;
    > + vdd33-supply = <&mt6366_vcn33_reg>;
    > +
    > + ports {
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + port@0 {
    > + reg = <0>;
    > +
    > + ps8640_in: endpoint {
    > + remote-endpoint = <&dsi_out>;
    > + };
    > + };
    > +
    > + port@1 {
    > + reg = <1>;
    > +
    > + ps8640_out: endpoint {
    > + remote-endpoint = <&panel_in>;
    > + };
    > + };
    > + };
    > +
    > + aux-bus {
    > + panel {
    > + compatible = "edp-panel";
    > + power-supply = <&pp3300_disp_x>;
    > + backlight = <&backlight_lcd0>;
    > +
    > + port {
    > + panel_in: endpoint {
    > + remote-endpoint = <&ps8640_out>;
    > + };
    > + };
    > + };
    > + };
    > + };
    > +};
    > +
    > +&i2c1 {
    > + i2c-scl-internal-delay-ns = <10000>;
    > +
    > + touchscreen: touchscreen@10 {
    > + compatible = "hid-over-i2c";
    > + reg = <0x10>;
    > + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&touchscreen_pins>;
    > + post-power-on-delay-ms = <10>;
    > + hid-descr-addr = <0x0001>;
    > + vdd-supply = <&pp3300_s3>;
    > + };
    > +};
    > +
    > +&i2c4 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&i2c4_pins>;
    > + clock-frequency = <400000>;
    > + status = "okay";
    > +
    > + proximity@28 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&sar_sensor_pins>;
    > + compatible = "semtech,sx9324";
    > + reg = <0x28>;
    > + interrupt-parent = <&pio>;
    > + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
    > + vdd-supply = <&mt6366_vio18_reg>;
    > + svdd-supply = <&mt6366_vio18_reg>;
    > + #io-channel-cells = <1>;
    > + };
    > +};
    > +
    > +&pio {
    > + i2c4_pins: i2c4-pins {
    > + pins-bus {
    > + pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
    > + <PINMUX_GPIO135__FUNC_SCL4>;
    > + bias-disable;
    > + drive-strength = <4>;
    > + input-enable;
    > + };
    > + };
    > +
    > + ps8640_pins: ps8640-pins {
    > + pins {
    > + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
    > + <PINMUX_GPIO98__FUNC_GPIO98>;
    > + output-low;
    > + };
    > + };
    > +
    > + sar_sensor_pins: sar-sensor-pins {
    > + pin-irq {
    > + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
    > + input-enable;
    > + bias-pull-up;
    > + };
    > + };
    > +};
    > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
    > new file mode 100644
    > index 000000000000..8dfc24afabea
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
    > @@ -0,0 +1,49 @@
    > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
    > +/*
    > + * Copyright 2023 Google LLC
    > + */
    > +
    > +/dts-v1/;
    > +#include "mt8186-corsola-krabby.dtsi"
    > +
    > +/ {
    > + model = "Google Tentacool board";
    > + compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
    > + chassis-type = "laptop";
    > +};
    > +
    > +/delete-node/ &gpio_keys;
    > +/delete-node/ &touchscreen;
    > +
    > +&i2c1 {
    > + status = "disabled";
    > +};
    > +
    > +&keyboard_controller {
    > + function-row-physmap = <
    > + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
    > + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
    > + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
    > + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
    > + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
    > + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
    > + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
    > + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
    > + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
    > + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
    > + >;
    > +
    > + linux,keymap = <
    > + MATRIX_KEY(0x00, 0x02, KEY_BACK)
    > + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
    > + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
    > + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
    > + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
    > + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
    > + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
    > + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
    > + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
    > + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
    > + CROS_STD_MAIN_KEYMAP
    > + >;
    > +};
    > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
    > new file mode 100644
    > index 000000000000..9b10336ede06
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
    > @@ -0,0 +1,26 @@
    > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
    > +/*
    > + * Copyright 2023 Google LLC
    > + */
    > +
    > +#include "mt8186-corsola-tentacool-sku327681.dts"
    > +
    > +/ {
    > + compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
    > +};
    > +
    > +/* This variant replaces only the touchpad controller. */
    > +&i2c2 {
    > + /delete-node/ touchpad@15;
    > +
    > + touchpad@15 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&trackpad_pin>;
    > + compatible = "hid-over-i2c";
    > + reg = <0x15>;
    > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
    > + hid-descr-addr = <0x0001>;
    > + vcc-supply = <&pp3300_s3>;
    > + wakeup-source;
    > + };
    > +};
    > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
    > new file mode 100644
    > index 000000000000..26e9f19758cb
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
    > @@ -0,0 +1,44 @@
    > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
    > +/*
    > + * Copyright 2022 Google LLC
    > + */
    > +
    > +/dts-v1/;
    > +#include "mt8186-corsola-krabby.dtsi"
    > +
    > +/ {
    > + model = "Google Tentacruel board";
    > + compatible = "google,tentacruel-sku262144", "google,tentacruel-sku262145",
    > + "google,tentacruel-sku262146", "google,tentacruel-sku262147",
    > + "google,tentacruel", "mediatek,mt8186";
    > + chassis-type = "convertible";
    > +};
    > +
    > +&keyboard_controller {
    > + function-row-physmap = <
    > + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
    > + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
    > + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
    > + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
    > + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
    > + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
    > + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
    > + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
    > + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
    > + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
    > + >;
    > +
    > + linux,keymap = <
    > + MATRIX_KEY(0x00, 0x02, KEY_BACK)
    > + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
    > + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
    > + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
    > + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
    > + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
    > + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
    > + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
    > + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
    > + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
    > + CROS_STD_MAIN_KEYMAP
    > + >;
    > +};
    > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
    > new file mode 100644
    > index 000000000000..59d4d21fc7d3
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
    > @@ -0,0 +1,28 @@
    > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
    > +/*
    > + * Copyright 2022 Google LLC
    > + */
    > +
    > +#include "mt8186-corsola-tentacruel-sku262144.dts"
    > +
    > +/ {
    > + compatible = "google,tentacruel-sku262144", "google,tentacruel-sku262145",
    > + "google,tentacruel-sku262146", "google,tentacruel-sku262147",
    > + "google,tentacruel", "mediatek,mt8186";
    > +};
    > +
    > +/* This variant replaces only the touchpad controller. */
    > +&i2c2 {
    > + /delete-node/ touchpad@15;
    > +
    > + touchpad@15 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&trackpad_pin>;
    > + compatible = "hid-over-i2c";
    > + reg = <0x15>;
    > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
    > + hid-descr-addr = <0x0001>;
    > + vcc-supply = <&pp3300_s3>;
    > + wakeup-source;
    > + };
    > +};
    > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
    > new file mode 100644
    > index 000000000000..42ebab1bafeb
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
    > @@ -0,0 +1,1704 @@
    > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
    > +/*
    > + * Copyright (C) 2022 MediaTek Inc.
    > + */
    > +/dts-v1/;
    > +#include "mt8186.dtsi"
    > +#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
    > +#include <dt-bindings/gpio/gpio.h>
    > +#include <dt-bindings/input/input.h>
    > +#include <dt-bindings/input/gpio-keys.h>
    > +
    > +/ {
    > + aliases {
    > + i2c0 = &i2c0;
    > + i2c1 = &i2c1;
    > + i2c2 = &i2c2;
    > + i2c3 = &i2c3;
    > + i2c5 = &i2c5;
    > + mmc0 = &mmc0;
    > + mmc1 = &mmc1;
    > + serial0 = &uart0;
    > + };
    > +
    > + chosen {
    > + stdout-path = "serial0:115200n8";
    > + };
    > +
    > + memory@40000000 {
    > + device_type = "memory";
    > + /* The size should be filled in by the bootloader. */
    > + reg = <0 0x40000000 0 0>;
    > + };
    > +
    > + backlight_lcd0: backlight-lcd0 {
    > + compatible = "pwm-backlight";
    > + pwms = <&pwm0 0 500000>;
    > + power-supply = <&ppvar_sys>;
    > + enable-gpios = <&pio 152 0>;
    > + brightness-levels = <0 1023>;
    > + num-interpolated-steps = <1023>;
    > + default-brightness-level = <576>;
    > + };
    > +
    > + btsco: bt-sco {
    > + compatible = "linux,bt-sco";
    > + #sound-dai-cells = <0>;
    > + };
    > +
    > + dmic_codec: dmic-codec {
    > + compatible = "dmic-codec";
    > + num-channels = <2>;
    > + wakeup-delay-ms = <50>;
    > + #sound-dai-cells = <0>;
    > + };
    > +
    > + gpio_keys: gpio-keys {
    > + compatible = "gpio-keys";
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&pen_eject>;
    > +
    > + pen_insert: pen-insert-switch {
    > + label = "Pen Insert";
    > + /* Insert = low, eject = high */
    > + gpios = <&pio 18 GPIO_ACTIVE_LOW>;
    > + linux,code = <SW_PEN_INSERTED>;
    > + linux,input-type = <EV_SW>;
    > + wakeup-event-action = <EV_ACT_DEASSERTED>;
    > + wakeup-source;
    > + };
    > + };
    > +
    > + pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx {
    > + compatible = "regulator-fixed";
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&en_pp1800_dpbrdg>;
    > + regulator-name = "pp1800_dpbrdg_dx";
    > + enable-active-high;
    > + gpio = <&pio 39 GPIO_ACTIVE_HIGH>;
    > + vin-supply = <&mt6366_vio18_reg>;
    > + };
    > +
    > + pp3300_disp_x: regulator-pp3300-disp-x {
    > + compatible = "regulator-fixed";
    > + regulator-name = "pp3300_disp_x";
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&edp_panel_fixed_pins>;
    > + enable-active-high;
    > + regulator-boot-on;
    > + gpio = <&pio 153 GPIO_ACTIVE_HIGH>;
    > + vin-supply = <&pp3300_z2>;
    > + };
    > +
    > + /* system wide LDO 3.3V power rail */
    > + pp3300_z5: regulator-pp3300-ldo-z5 {
    > + compatible = "regulator-fixed";
    > + regulator-name = "pp3300_ldo_z5";
    > + regulator-always-on;
    > + regulator-boot-on;
    > + regulator-min-microvolt = <3300000>;
    > + regulator-max-microvolt = <3300000>;
    > + vin-supply = <&ppvar_sys>;
    > + };
    > +
    > + /* separately switched 3.3V power rail */
    > + pp3300_s3: regulator-pp3300-s3 {
    > + compatible = "regulator-fixed";
    > + regulator-name = "pp3300_s3";
    > + /* automatically sequenced by PMIC EXT_PMIC_EN2 */
    > + regulator-always-on;
    > + regulator-boot-on;
    > + vin-supply = <&pp3300_z2>;
    > + };
    > +
    > + /* system wide 3.3V power rail */
    > + pp3300_z2: regulator-pp3300-z2 {
    > + compatible = "regulator-fixed";
    > + regulator-name = "pp3300_z2";
    > + /* EN pin tied to pp4200_z2, which is controlled by EC */
    > + regulator-always-on;
    > + regulator-boot-on;
    > + regulator-min-microvolt = <3300000>;
    > + regulator-max-microvolt = <3300000>;
    > + vin-supply = <&ppvar_sys>;
    > + };
    > +
    > + /* system wide 4.2V power rail */
    > + pp4200_z2: regulator-pp4200-z2 {
    > + compatible = "regulator-fixed";
    > + regulator-name = "pp4200_z2";
    > + /* controlled by EC */
    > + regulator-always-on;
    > + regulator-boot-on;
    > + regulator-min-microvolt = <4200000>;
    > + regulator-max-microvolt = <4200000>;
    > + vin-supply = <&ppvar_sys>;
    > + };
    > +
    > + /* system wide switching 5.0V power rail */
    > + pp5000_z2: regulator-pp5000-z2 {
    > + compatible = "regulator-fixed";
    > + regulator-name = "pp5000_z2";
    > + /* controlled by EC */
    > + regulator-always-on;
    > + regulator-boot-on;
    > + regulator-min-microvolt = <5000000>;
    > + regulator-max-microvolt = <5000000>;
    > + vin-supply = <&ppvar_sys>;
    > + };
    > +
    > + /* system wide semi-regulated power rail from battery or USB */
    > + ppvar_sys: regulator-ppvar-sys {
    > + compatible = "regulator-fixed";
    > + regulator-name = "ppvar_sys";
    > + regulator-always-on;
    > + regulator-boot-on;
    > + };
    > +
    > + reserved_memory: reserved-memory {
    > + #address-cells = <2>;
    > + #size-cells = <2>;
    > + ranges;
    > +
    > + adsp_dma_mem: memory@61000000 {
    > + compatible = "shared-dma-pool";
    > + reg = <0 0x61000000 0 0x100000>;
    > + no-map;
    > + };
    > +
    > + adsp_mem: memory@60000000 {
    > + compatible = "shared-dma-pool";
    > + reg = <0 0x60000000 0 0xA00000>;
    > + no-map;
    > + };
    > +
    > + scp_mem: memory@50000000 {
    > + compatible = "shared-dma-pool";
    > + reg = <0 0x50000000 0 0x10a0000>;
    > + no-map;
    > + };
    > + };
    > +
    > + sound: sound {
    > + compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
    > + pinctrl-names = "aud_clk_mosi_off",
    > + "aud_clk_mosi_on",
    > + "aud_clk_miso_off",
    > + "aud_clk_miso_on",
    > + "aud_dat_miso_off",
    > + "aud_dat_miso_on",
    > + "aud_dat_mosi_off",
    > + "aud_dat_mosi_on",
    > + "aud_gpio_i2s0_off",
    > + "aud_gpio_i2s0_on",
    > + "aud_gpio_i2s1_off",
    > + "aud_gpio_i2s1_on",
    > + "aud_gpio_i2s2_off",
    > + "aud_gpio_i2s2_on",
    > + "aud_gpio_i2s3_off",
    > + "aud_gpio_i2s3_on",
    > + "aud_gpio_tdm_off",
    > + "aud_gpio_tdm_on",
    > + "aud_gpio_pcm_off",
    > + "aud_gpio_pcm_on",
    > + "aud_gpio_dmic_sec";
    > + pinctrl-0 = <&aud_clk_mosi_off>;
    > + pinctrl-1 = <&aud_clk_mosi_on>;
    > + pinctrl-2 = <&aud_clk_miso_off>;
    > + pinctrl-3 = <&aud_clk_miso_on>;
    > + pinctrl-4 = <&aud_dat_miso_off>;
    > + pinctrl-5 = <&aud_dat_miso_on>;
    > + pinctrl-6 = <&aud_dat_mosi_off>;
    > + pinctrl-7 = <&aud_dat_mosi_on>;
    > + pinctrl-8 = <&aud_gpio_i2s0_off>;
    > + pinctrl-9 = <&aud_gpio_i2s0_on>;
    > + pinctrl-10 = <&aud_gpio_i2s1_off>;
    > + pinctrl-11 = <&aud_gpio_i2s1_on>;
    > + pinctrl-12 = <&aud_gpio_i2s2_off>;
    > + pinctrl-13 = <&aud_gpio_i2s2_on>;
    > + pinctrl-14 = <&aud_gpio_i2s3_off>;
    > + pinctrl-15 = <&aud_gpio_i2s3_on>;
    > + pinctrl-16 = <&aud_gpio_tdm_off>;
    > + pinctrl-17 = <&aud_gpio_tdm_on>;
    > + pinctrl-18 = <&aud_gpio_pcm_off>;
    > + pinctrl-19 = <&aud_gpio_pcm_on>;
    > + pinctrl-20 = <&aud_gpio_dmic_sec>;
    > + mediatek,adsp = <&adsp>;
    > + mediatek,platform = <&afe>;
    > +
    > + playback-codecs {
    > + sound-dai = <&it6505dptx>, <&rt1019p>;
    > + };
    > +
    > + headset-codec {
    > + sound-dai = <&rt5682s 0>;
    > + };
    > + };
    > +
    > + rt1019p: speaker-codec {
    > + compatible = "realtek,rt1019p";
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&rt1019p_pins_default>;
    > + sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
    > + #sound-dai-cells = <0>;
    > + };
    > +
    > + usb_p1_vbus: regulator-usb-p1-vbus {
    > + compatible = "regulator-fixed";
    > + regulator-name = "vbus1";
    > + regulator-min-microvolt = <5000000>;
    > + regulator-max-microvolt = <5000000>;
    > + enable-active-high;
    > + gpio = <&pio 148 GPIO_ACTIVE_HIGH>;
    > + vin-supply = <&pp5000_z2>;
    > + };
    > +
    > + wifi_pwrseq: wifi-pwrseq {
    > + compatible = "mmc-pwrseq-simple";
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&wifi_enable_pin>;
    > + post-power-on-delay-ms = <50>;
    > + reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
    > + };
    > +
    > + wifi_wakeup: wifi-wakeup {
    > + compatible = "gpio-keys";
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&wifi_wakeup_pin>;
    > +
    > + wowlan-event {
    > + label = "Wake on WiFi";
    > + gpios = <&pio 7 GPIO_ACTIVE_LOW>;
    > + linux,code = <KEY_WAKEUP>;
    > + wakeup-source;
    > + };
    > + };
    > +};
    > +
    > +&adsp {
    > + memory-region = <&adsp_dma_mem>, <&adsp_mem>;
    > + status = "fail"; /* causes stall */
    > +};
    > +
    > +&afe {
    > + i2s0-share = "I2S1";
    > + i2s3-share = "I2S2";
    > + status = "okay";
    > +};
    > +
    > +&cci {
    > + proc-supply = <&mt6366_vproc12_reg>;
    > +};
    > +
    > +&cpu0 {
    > + proc-supply = <&mt6366_vproc12_reg>;
    > +};
    > +
    > +&cpu1 {
    > + proc-supply = <&mt6366_vproc12_reg>;
    > +};
    > +
    > +&cpu2 {
    > + proc-supply = <&mt6366_vproc12_reg>;
    > +};
    > +
    > +&cpu3 {
    > + proc-supply = <&mt6366_vproc12_reg>;
    > +};
    > +
    > +&cpu4 {
    > + proc-supply = <&mt6366_vproc12_reg>;
    > +};
    > +
    > +&cpu5 {
    > + proc-supply = <&mt6366_vproc12_reg>;
    > +};
    > +
    > +&cpu6 {
    > + proc-supply = <&mt6366_vproc11_reg>;
    > +};
    > +
    > +&cpu7 {
    > + proc-supply = <&mt6366_vproc11_reg>;
    > +};
    > +
    > +&dpi {
    > + pinctrl-names = "default", "sleep";
    > + pinctrl-0 = <&dpi_pins_default>;
    > + pinctrl-1 = <&dpi_pins_sleep>;
    > + status = "okay";
    > +};
    > +
    > +&dpi_out {
    > + remote-endpoint = <&it6505_in>;
    > +};
    > +
    > +&dsi0 {
    > + status = "okay";
    > +};
    > +
    > +&gic {
    > + mediatek,broken-save-restore-fw;
    > +};
    > +
    > +&gpu {
    > + mali-supply = <&mt6366_vgpu_reg>;
    > + status = "okay";
    > +};
    > +
    > +&i2c0 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&i2c0_pins>;
    > + status = "okay";
    > +};
    > +
    > +&i2c1 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&i2c1_pins>;
    > + clock-frequency = <400000>;
    > + i2c-scl-internal-delay-ns = <8000>;
    > + status = "okay";
    > +};
    > +
    > +&i2c2 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&i2c2_pins>;
    > + clock-frequency = <400000>;
    > + i2c-scl-internal-delay-ns = <10000>;
    > + status = "okay";
    > +
    > + touchpad@15 {
    > + compatible = "elan,ekth3000";
    > + reg = <0x15>;
    > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&trackpad_pin>;
    > + vcc-supply = <&pp3300_s3>;
    > + wakeup-source;
    > + };
    > +};
    > +
    > +&i2c3 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&i2c3_pins>;
    > + clock-frequency = <100000>;
    > + status = "okay";
    > +
    > + it6505dptx: dp-bridge@5c {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&it6505_pins>;
    > + compatible = "ite,it6505";
    > + reg = <0x5c>;
    > + interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>;
    > + ovdd-supply = <&mt6366_vsim2_reg>;
    > + pwr18-supply = <&pp1800_dpbrdg_dx>;
    > + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
    > + no-laneswap;
    > +
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > + #sound-dai-cells = <0>;
    > +
    > + ports {
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + port@0 {
    > + reg = <0>;
    > +
    > + it6505_in: endpoint {
    > + link-frequencies = /bits/ 64 <150000000>;
    > + remote-endpoint = <&dpi_out>;
    > + };
    > + };
    > +
    > + port@1 {
    > + reg = <1>;
    > + };
    > + };
    > + };
    > +};
    > +
    > +&i2c5 {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&i2c5_pins>;
    > + status = "okay";
    > +
    > + rt5682s: codec@1a {
    > + compatible = "realtek,rt5682s";
    > + reg = <0x1a>;
    > + interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
    > + realtek,jd-src = <1>;
    > + AVDD-supply = <&mt6366_vio18_reg>;
    > + DBVDD-supply = <&mt6366_vio18_reg>;
    > + LDO1-IN-supply = <&mt6366_vio18_reg>;
    > + MICVDD-supply = <&pp3300_z2>;
    > + #sound-dai-cells = <1>;
    > + };
    > +};
    > +
    > +&mfg0 {
    > + domain-supply = <&mt6366_vsram_gpu_reg>;
    > +};
    > +
    > +&mfg1 {
    > + domain-supply = <&mt6366_vgpu_reg>;
    > +};
    > +
    > +&mipi_tx0 {
    > + status = "okay";
    > +};
    > +
    > +&mmc0 {
    > + pinctrl-names = "default", "state_uhs";
    > + pinctrl-0 = <&mmc0_pins_default>;
    > + pinctrl-1 = <&mmc0_pins_uhs>;
    > + bus-width = <8>;
    > + max-frequency = <200000000>;
    > + non-removable;
    > + cap-mmc-highspeed;
    > + mmc-hs200-1_8v;
    > + mmc-hs400-1_8v;
    > + supports-cqe;
    > + no-sd;
    > + no-sdio;
    > + cap-mmc-hw-reset;
    > + hs400-ds-delay = <0x11814>;
    > + mediatek,hs400-ds-dly3 = <0x14>;
    > + vmmc-supply = <&mt6366_vemc_reg>;
    > + vqmmc-supply = <&mt6366_vio18_reg>;
    > + status = "okay";
    > +};
    > +
    > +&mmc1 {
    > + pinctrl-names = "default", "state_uhs", "state_eint";
    > + pinctrl-0 = <&mmc1_pins_default>;
    > + pinctrl-1 = <&mmc1_pins_uhs>;
    > + pinctrl-2 = <&mmc1_pins_eint>;
    > + /delete-property/ interrupts;
    > + interrupt-names = "msdc", "sdio_wakeup";
    > + interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
    > + <&pio 87 IRQ_TYPE_LEVEL_LOW>;
    > + bus-width = <4>;
    > + max-frequency = <200000000>;
    > + cap-sd-highspeed;
    > + sd-uhs-sdr104;
    > + sd-uhs-sdr50;
    > + keep-power-in-suspend;
    > + wakeup-source;
    > + cap-sdio-irq;
    > + no-mmc;
    > + no-sd;
    > + non-removable;
    > + vmmc-supply = <&pp3300_s3>;
    > + vqmmc-supply = <&mt6366_vio18_reg>;
    > + mmc-pwrseq = <&wifi_pwrseq>;
    > + status = "okay";
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + bluetooth@2 {
    > + compatible = "mediatek,mt7921s-bluetooth";
    > + reg = <2>;
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&bt_pins_reset>;
    > + reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>;
    > + };
    > +};
    > +
    > +&nor_flash {
    > + pinctrl-names = "default";
    > + pinctrl-0 = <&nor_pins_default>;
    > + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>;
    > + status = "okay";
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + flash@0 {
    > + compatible = "jedec,spi-nor";
    > + reg = <0>;
    > + spi-max-frequency = <39000000>;
    > + };
    > +};
    > +
    > +&pio {
    > + /* 185 lines */
    > + gpio-line-names = "TP",
    > + "TP",
    > + "TP",
    > + "I2S0_HP_DI",
    > + "I2S3_DP_SPKR_DO",
    > + "SAR_INT_ODL",
    > + "BT_WAKE_AP_ODL",
    > + "WIFI_INT_ODL",
    > + "DPBRDG_INT_ODL",
    > + "EDPBRDG_INT_ODL",
    > + "EC_AP_HPD_OD",
    > + "TCHPAD_INT_ODL",
    > + "TCHSCR_INT_1V8_ODL",
    > + "EC_AP_INT_ODL",
    > + "EC_IN_RW_ODL",
    > + "GSC_AP_INT_ODL",
    > + /* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
    > + "AP_FLASH_WP_L",
    > + "HP_INT_ODL",
    > + "PEN_EJECT_OD",
    > + "WCAM_PWDN_L",
    > + "WCAM_RST_L",
    > + "UCAM_SEN_EN",
    > + "UCAM_RST_L",
    > + "LTE_RESET_L",
    > + "LTE_SAR_DETECT_L",
    > + "I2S2_DP_SPK_MCK",
    > + "I2S2_DP_SPKR_BCK",
    > + "I2S2_DP_SPKR_LRCK",
    > + "I2S2_DP_SPKR_DI (TP)",
    > + "EN_PP1000_EDPBRDG",
    > + "EN_PP1800_EDPBRDG",
    > + "EN_PP3300_EDPBRDG",
    > + "UART_GSC_TX_AP_RX",
    > + "UART_AP_TX_GSC_RX",
    > + "UART_DBGCON_TX_ADSP_RX",
    > + "UART_ADSP_TX_DBGCON_RX",
    > + "EN_PP1000_DPBRDG",
    > + "TCHSCR_REPORT_DISABLE",
    > + "EN_PP3300_DPBRDG",
    > + "EN_PP1800_DPBRDG",
    > + "SPI_AP_CLK_EC",
    > + "SPI_AP_CS_EC_L",
    > + "SPI_AP_DO_EC_DI",
    > + "SPI_AP_DI_EC_DO",
    > + "SPI_AP_CLK_GSC",
    > + "SPI_AP_CS_GSC_L",
    > + "SPI_AP_DO_GSC_DI",
    > + "SPI_AP_DI_GSC_DO",
    > + "UART_DBGCON_TX_SCP_RX",
    > + "UART_SCP_TX_DBGCON_RX",
    > + "EN_PP1200_CAM_X",
    > + "EN_PP2800A_VCM_X",
    > + "EN_PP2800A_UCAM_X",
    > + "EN_PP2800A_WCAM_X",
    > + "WLAN_MODULE_RST_L",
    > + "EN_PP1200_UCAM_X",
    > + "I2S1_HP_DO",
    > + "I2S1_HP_BCK",
    > + "I2S1_HP_LRCK",
    > + "I2S1_HP_MCK",
    > + "TCHSCR_RST_1V8_L",
    > + "SPI_AP_CLK_ROM",
    > + "SPI_AP_CS_ROM_L",
    > + "SPI_AP_DO_ROM_DI",
    > + "SPI_AP_DI_ROM_DO",
    > + "NC",
    > + "NC",
    > + "EMMC_STRB",
    > + "EMMC_CLK",
    > + "EMMC_CMD",
    > + "EMMC_RST_L",
    > + "EMMC_DATA0",
    > + "EMMC_DATA1",
    > + "EMMC_DATA2",
    > + "EMMC_DATA3",
    > + "EMMC_DATA4",
    > + "EMMC_DATA5",
    > + "EMMC_DATA6",
    > + "EMMC_DATA7",
    > + "AP_KPCOL0",
    > + "NC",
    > + "NC",
    > + "NC",
    > + "TP",
    > + "SDIO_CLK",
    > + "SDIO_CMD",
    > + "SDIO_DATA0",
    > + "SDIO_DATA1",
    > + "SDIO_DATA2",
    > + "SDIO_DATA3",
    > + "NC",
    > + "NC",
    > + "NC",
    > + "NC",
    > + "NC",
    > + "NC",
    > + "EDPBRDG_PWREN",
    > + "BL_PWM_1V8",
    > + "EDPBRDG_RST_L",
    > + "MIPI_DPI_CLK",
    > + "MIPI_DPI_VSYNC",
    > + "MIPI_DPI_HSYNC",
    > + "MIPI_DPI_DE",
    > + "MIPI_DPI_D0",
    > + "MIPI_DPI_D1",
    > + "MIPI_DPI_D2",
    > + "MIPI_DPI_D3",
    > + "MIPI_DPI_D4",
    > + "MIPI_DPI_D5",
    > + "MIPI_DPI_D6",
    > + "MIPI_DPI_DA7",
    > + "MIPI_DPI_D8",
    > + "MIPI_DPI_D9",
    > + "MIPI_DPI_D10",
    > + "MIPI_DPI_D11",
    > + "PCM_BT_CLK",
    > + "PCM_BT_SYNC",
    > + "PCM_BT_DI",
    > + "PCM_BT_DO",
    > + "JTAG_TMS_TP",
    > + "JTAG_TCK_TP",
    > + "JTAG_TDI_TP",
    > + "JTAG_TDO_TP",
    > + "JTAG_TRSTN_TP",
    > + "CLK_24M_WCAM",
    > + "CLK_24M_UCAM",
    > + "UCAM_DET_ODL",
    > + "AP_I2C_EDPBRDG_SCL_1V8",
    > + "AP_I2C_EDPBRDG_SDA_1V8",
    > + "AP_I2C_TCHSCR_SCL_1V8",
    > + "AP_I2C_TCHSCR_SDA_1V8",
    > + "AP_I2C_TCHPAD_SCL_1V8",
    > + "AP_I2C_TCHPAD_SDA_1V8",
    > + "AP_I2C_DPBRDG_SCL_1V8",
    > + "AP_I2C_DPBRDG_SDA_1V8",
    > + "AP_I2C_WLAN_SCL_1V8",
    > + "AP_I2C_WLAN_SDA_1V8",
    > + "AP_I2C_AUD_SCL_1V8",
    > + "AP_I2C_AUD_SDA_1V8",
    > + "AP_I2C_TPM_SCL_1V8",
    > + "AP_I2C_UCAM_SDA_1V8",
    > + "AP_I2C_UCAM_SCL_1V8",
    > + "AP_I2C_UCAM_SDA_1V8",
    > + "AP_I2C_WCAM_SCL_1V8",
    > + "AP_I2C_WCAM_SDA_1V8",
    > + "SCP_I2C_SENSOR_SCL_1V8",
    > + "SCP_I2C_SENSOR_SDA_1V8",
    > + "AP_EC_WARM_RST_REQ",
    > + "AP_XHCI_INIT_DONE",
    > + "USB3_HUB_RST_L",
    > + "EN_SPKR",
    > + "BEEP_ON",
    > + "AP_EDP_BKLTEN",
    > + "EN_PP3300_DISP_X",
    > + "EN_PP3300_SDBRDG_X",
    > + "BT_KILL_1V8_L",
    > + "WIFI_KILL_1V8_L",
    > + "PWRAP_SPI0_CSN",
    > + "PWRAP_SPI0_CK",
    > + "PWRAP_SPI0_MO",
    > + "PWRAP_SPI0_MI",
    > + "SRCLKENA0",
    > + "SRCLKENA1",
    > + "SCP_VREQ_VAO",
    > + "AP_RTC_CLK32K",
    > + "AP_PMIC_WDTRST_L",
    > + "AUD_CLK_MOSI",
    > + "AUD_SYNC_MOSI",
    > + "AUD_DAT_MOSI0",
    > + "AUD_DAT_MOSI1",
    > + "AUD_CLK_MISO",
    > + "AUD_SYNC_MISO",
    > + "AUD_DAT_MISO0",
    > + "AUD_DAT_MISO1",
    > + "NC",
    > + "NC",
    > + "DPBRDG_PWREN",
    > + "DPBRDG_RST_L",
    > + "LTE_W_DISABLE_L",
    > + "LTE_SAR_DETECT_L",
    > + "EN_PP3300_LTE_X",
    > + "LTE_PWR_OFF_L",
    > + "LTE_RESET_L",
    > + "TP",
    > + "TP";
    > +
    > + aud_clk_mosi_off: aud-clk-mosi-off-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>,
    > + <PINMUX_GPIO167__FUNC_GPIO167>;
    > + input-enable;
    > + bias-pull-down;
    > + };
    > + };
    > +
    > + aud_clk_mosi_on: aud-clk-mosi-on-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>,
    > + <PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>;
    > + };
    > + };
    > +
    > + aud_clk_miso_off: aud-clk-miso-off-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO170__FUNC_GPIO170>,
    > + <PINMUX_GPIO171__FUNC_GPIO171>;
    > + input-enable;
    > + bias-pull-down;
    > + };
    > + };
    > +
    > + aud_clk_miso_on: aud-clk-miso-on-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>,
    > + <PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>;
    > + };
    > + };
    > +
    > + aud_dat_mosi_off: aud-dat-mosi-off-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO168__FUNC_GPIO168>,
    > + <PINMUX_GPIO169__FUNC_GPIO169>;
    > + input-enable;
    > + bias-pull-down;
    > + };
    > + };
    > +
    > + aud_dat_mosi_on: aud-dat-mosi-on-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>,
    > + <PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>;
    > + };
    > + };
    > +
    > + aud_dat_miso_off: aud-dat-miso-off-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO172__FUNC_GPIO172>,
    > + <PINMUX_GPIO173__FUNC_GPIO173>;
    > + input-enable;
    > + bias-pull-down;
    > + };
    > + };
    > +
    > + aud_dat_miso_on: aud-dat-miso-on-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>,
    > + <PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>;
    > + input-schmitt-enable;
    > + bias-disable;
    > + };
    > + };
    > +
    > + aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
    > + };
    > + };
    > +
    > + aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>;
    > + };
    > + };
    > +
    > + aud_gpio_i2s1_off: aud-gpio-i2s-off-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO56__FUNC_GPIO56>,
    > + <PINMUX_GPIO57__FUNC_GPIO57>,
    > + <PINMUX_GPIO58__FUNC_GPIO58>,
    > + <PINMUX_GPIO59__FUNC_GPIO59>;
    > + output-low;
    > + };
    > + };
    > +
    > + aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>,
    > + <PINMUX_GPIO57__FUNC_I2S1_BCK>,
    > + <PINMUX_GPIO58__FUNC_I2S1_LRCK>,
    > + <PINMUX_GPIO59__FUNC_I2S1_MCK>;
    > + };
    > + };
    > +
    > + aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO26__FUNC_GPIO26>,
    > + <PINMUX_GPIO27__FUNC_GPIO27>;
    > + output-low;
    > + };
    > + };
    > +
    > + aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>,
    > + <PINMUX_GPIO27__FUNC_I2S2_LRCK>;
    > + drive-strength = <4>;
    > + };
    > + };
    > +
    > + aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
    > + output-low;
    > + };
    > + };
    > +
    > + aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins {
    > + pins-cmd-dat {
    > + pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>;
    > + drive-strength = <4>;
    > + };
    > + };
    > +
    > + aud_gpio_tdm_off: aud-gpio-tdm-off-pins { };
    > +
    > + aud_gpio_tdm_on: aud-gpio-tdm-on-pins { };

    Hi Chen-Yu,

    These two aud_gpio_tdm empty entries cause this message to be printed:

    [ 12.949519] mt8186_mt6366_rt1019_rt5682s sound: there is not valid
    maps for state aud_gpio_tdm_off
    [ 12.959025] mt8186_mt6366_rt1019_rt5682s sound: there is not valid
    maps for state aud_gpio_tdm_on


    Eugen

    [...]

    \
     
     \ /
      Last update: 2023-10-23 11:05    [W:3.167 / U:0.080 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site