lkml.org 
[lkml]   [2023]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 09/11] leds: aw200xx: add support for aw20108 device
On Wed, Oct 18, 2023 at 9:30 PM Dmitry Rokosov
<ddrokosov@salutedevices.com> wrote:
>
> From: George Stark <gnstark@salutedevices.com>
>
> Add support for Awinic aw20108 device from the same LED drivers famliy.

family

> New device supports 108 leds using matrix of 12x9 outputs.

LEDs
a matrix

...

> - This option enables support for the AW20036/AW20054/AW20072 LED driver.
> - It is a 3x12/6x9/6x12 matrix LED driver programmed via
> - an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
> + This option enables support for the AW20036/AW20054/AW20072/AW20108
> + LED driver. It is a 3x12/6x9/6x12/9x12 matrix LED driver programmed via
> + an I2C interface, up to 36/54/72/108 LEDs or 12/18/24/36 RGBs,
> 3 pattern controllers for auto breathing or group dimming control.

For better maintenance I always suggest in the cases like this to
convert help to provide a list of the supported devices, like:

This option enables support for the following Awinic LED drivers:
- AW20036 (3x12)
- ...
...

And if any new comes to this, it will be just a one liner change.

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2023-10-19 11:18    [W:0.545 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site