lkml.org 
[lkml]   [2023]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default
From
On 18. 10. 23, 11:17, Crescent CY Hsieh wrote:
> MOXA PCIe RS422/RS485 boards will not function by default because of the
> initial default serial interface of all MOXA PCIe boards is set to RS232.
>
> This patch fixes the problem above by setting the initial default serial
> interface to RS422 for those MOXA RS422/RS485 PCIe boards.
>
> Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com>
> ---
> drivers/tty/serial/8250/8250_pci.c | 52 ++++++++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
> index b2be3783f..29a28e72b 100644
> --- a/drivers/tty/serial/8250/8250_pci.c
> +++ b/drivers/tty/serial/8250/8250_pci.c
...
> @@ -1981,13 +1987,59 @@ static bool pci_moxa_is_mini_pcie(unsigned short device)
> return false;
> }
>
> +/*
> + * The second digit of the MOXA PCIe device ID in hexadecimal indicates
> + * which serial interface modes this board supports:
> + *
> + * 0x*0** - RS232
> + * 0x*1** - RS232/RS422/RS485
> + * 0x*3** - RS422/RS485
> + * 0x*6** - RS232
> + */
> +static bool pci_moxa_match_second_digit(unsigned short device,
> + unsigned short pattern)
> +{
> + return (device & 0x0F00) == pattern;
> +}

Actually, would it make sense to define the below instead:

enum {
MOXA_SUPP_RS232 = BIT(0),
MOXA_SUPP_RS422 = BIT(1),
MOXA_SUPP_RS485 = BIT(2),
};

u32 pci_moxa_supported_rs(struct pci_dev *dev)
{
switch (dev->device & 0x0f00) {
case 0x0000:
case 0x0600: // or default: ???
return MOXA_SUPP_RS232;
case 0x0100:
return MOXA_SUPP_RS232 | MOXA_SUPP_RS422 | MOXA_SUPP_RS485;
case 0x0300:
return MOXA_SUPP_RS422 | MOXA_SUPP_RS485;
}

return 0;
}

...
> static int pci_moxa_init(struct pci_dev *dev)
> {
> unsigned short device = dev->device;
> resource_size_t iobar_addr = pci_resource_start(dev, 2);
> + unsigned int i;
> unsigned int num_ports = (device & 0x00F0) >> 4;
> u8 val;
>
> + /*
> + * For the device IDs of MOXA PCIe boards match the pattern 0x*3**,
> + * the initial default serial interface mode should be set to RS422.
> + */
> + if (pci_moxa_match_second_digit(device, 0x0300)) {

And here:
if (pci_moxa_supported_rs(dev) == MOXA_SUPP_RS422 | MOXA_SUPP_RS485)

or perhaps:
if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232))
?

> + for (i = 0; i < num_ports; ++i)
> + pci_moxa_set_interface(dev, i, MOXA_RS422);
> + }
> /*
> * Enable hardware buffer to prevent break signal output when system boots up.
> * This hardware buffer is only supported on Mini PCIe series.

--
js
suse labs

\
 
 \ /
  Last update: 2023-10-19 11:18    [W:0.810 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site