lkml.org 
[lkml]   [2023]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH v9 09/34] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
    From
    Hi Pierre,

    On 10/18/2023 6:00 PM, Pierre-Louis Bossart wrote:
    >
    >
    >>>>>> Specifically, the QC ADSP can support all potential endpoints that are
    >>>>>> exposed by the audio data interface.  This includes, feedback
    >>>>>> endpoints
    >>>>>> (both implicit and explicit) as well as the isochronous (data)
    >>>>>> endpoints.
    >>>>>
    >>>>> implicit feedback means support for capture. This is confusing...
    >>>>>
    >>>>
    >>>> I mean, a USB device can expose a capture path, but as of now, we won't
    >>>> enable the offloading to the audio DSP for it.  However, if we're
    >>>> executing playback, and device does support implicit feedback, we will
    >>>> pass that along to the audio DSP to utilize.
    >>>
    >>> Not following. Implicit feedback means a capture stream *SHALL* be
    >>> started. Are you saying this capture stream is hidden and handled at the
    >>> DSP level only? If yes, what prevents you from exposing the capture
    >>> stream to userspace as well?
    >>>
    >>> I must be missing something.
    >>>
    >>
    >> My understanding is that with implicit feedback endpoints, it allows for
    >> another data endpoint in the opposite direction to be utilized as a
    >> feedback endpoint (versus having to expose another EP, such as in the
    >> case of explicit feedback).  For example, if we are enabling the
    >> playback path (and the device does have a capture data ep) then the data
    >> ep used for the capture path can be used.
    >
    > That's right, so all the plumbing is enabled for the capture path...
    > Making a decision to discard the data is very odd, all the work has
    > already been done at lower levels, so why not expose the captured data?
    >

    So that would be at the USB level, but from the audio DSP end, there are
    still things that need to be enabled to route the data properly. For
    feedback endpoints, the data we're actually sending won't involve the
    audio streaming side of things on the DSP.

    Thanks
    Wesley Cheng

    \
     
     \ /
      Last update: 2023-10-19 20:43    [W:2.293 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site