lkml.org 
[lkml]   [2023]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net 5/6] net: hns3: fix wrong print link down up
From

on 2023/10/17 21:59, Andrew Lunn wrote
> I still think this is totally valid and correct.
>
> When you turn auto-neg off the link partner is going to react to that,
> it might drop the link. After a while, the link partner will give up
> trying to perform auto-neg and might fall back to 10/Half. At which
> point, the link might allow traffic flow. However, in this example,
> you have a duplex mis-match, so it might not work correctly.
>
> Turning off auto-neg is something you need to do at both ends, and you
> need to then force both ends to the same settings. Link down is
> expected. I would actually be suppressed if no link down events were
> reported.
>
> Andrew

Hi Andrew,
Thank you for your comments, we are re-evaluating this issue and may drop this patch.

Regards
Jijie

\
 
 \ /
  Last update: 2023-10-18 14:27    [W:0.177 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site