lkml.org 
[lkml]   [2023]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals
From


On 10/13/23 10:09, Luca Weiss wrote:
> Configure the thermals for the CHARGER_SKIN_THERM and USB_CONN_THERM
> thermistors connected to PM7250B.
>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
> arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 66 ++++++++++++++++++++++
> 1 file changed, 66 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> index 2de0b8c26c35..7fe19b556e6a 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> @@ -134,6 +134,36 @@ afvdd_2p8: regulator-afvdd-2p8 {
> enable-active-high;
> vin-supply = <&vreg_bob>;
> };
> +
> + thermal-zones {
> + chg-skin-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pm7250b_adc_tm 0>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
I guess looking at skin-temp-thermal in x13s dts for starters
is a good idea.. we should probably then adjust it to something
more pocketable..

Konrad

\
 
 \ /
  Last update: 2023-10-18 22:32    [W:0.188 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site