lkml.org 
[lkml]   [2023]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: misc: onboard_usb_hub: extend gl3510 reset duration
On Fri, Oct 06, 2023 at 12:10:28PM +0200, Jerome Brunet wrote:
> Initial tests with the gl3510 has been done on libretech aml-a311d-cc.
> A 50us reset was fine as long as the hub node was under the usb phy node it
> DT. DT schema does not allow that. Moving the hub under the dwc3 controller
> caused issues, such as:
>
> onboard-usb-hub 1-1: Failed to suspend device, error -32
> onboard-usb-hub 1-1: can't set config #1, error -71
> onboard-usb-hub 1-1: Failed to suspend device, error -32
> onboard-usb-hub 1-1: USB disconnect, device number 2
>
> Extending the reset duration solves the problem.
> Since there is no documentation available for this hub, it is difficult to
> know the actual required reset duration. 200us seems to work fine so far.
>
> Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
> Fixes: 65009ccf7e8f ("usb: misc: onboard_usb_hub: add Genesys Logic gl3510 hub support")

I can't find this git id, what tree is it in?

thanks,

greg k-h

\
 
 \ /
  Last update: 2023-10-10 08:57    [W:0.069 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site