Messages in this thread | | | Date | Mon, 9 Jan 2023 10:38:00 +0100 | From | Neil Armstrong <> | Subject | Re: [PATCH v2 6/7] drm/msm/dsi: add support for DSI-PHY on SM8550 |
| |
On 09/01/2023 10:26, Neil Armstrong wrote: > SM8550 use a 4nm DSI PHYs, which share register definitions > with 7nm DSI PHYs. Rather than duplicating the driver, handle > 4nm variant inside the common 5+7nm driver. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > drivers/gpu/drm/msm/Kconfig | 4 +- > drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 + > drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 + > drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 88 ++++++++++++++++++++++++++----- > 4 files changed, 79 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig > index e7b100d97f88..949b18a29a55 100644 > --- a/drivers/gpu/drm/msm/Kconfig > +++ b/drivers/gpu/drm/msm/Kconfig > @@ -140,11 +140,11 @@ config DRM_MSM_DSI_10NM_PHY > Choose this option if DSI PHY on SDM845 is used on the platform. > > config DRM_MSM_DSI_7NM_PHY > - bool "Enable DSI 7nm/5nm PHY driver in MSM DRM" > + bool "Enable DSI 7nm/5nm/4nm PHY driver in MSM DRM" > depends on DRM_MSM_DSI > default y > help > - Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SC7280 > + Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SM8550/SC7280 > is used on the platform. > > config DRM_MSM_HDMI > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > index 04126af74bb5..798cd3c86031 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > @@ -573,6 +573,8 @@ static const struct of_device_id dsi_phy_dt_match[] = { > .data = &dsi_phy_5nm_8350_cfgs }, > { .compatible = "qcom,sm8450-dsi-phy-5nm", > .data = &dsi_phy_5nm_8450_cfgs }, > + { .compatible = "qcom,dsi-phy-4nm-8550",
Forgot to change this... I can resend a v3 with this fixed.
Neil
> + .data = &dsi_phy_4nm_8550_cfgs }, > #endif > {} > }; > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > index f7a907ed2b4b..58f9e09f5224 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > @@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs; > extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs; > extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs; > extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs; > +extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs; > > struct msm_dsi_dphy_timing { > u32 clk_zero; > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > index 7b2c16b3a36c..af5c952c6ad0 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c > @@ -47,6 +47,8 @@ > #define DSI_PHY_7NM_QUIRK_V4_2 BIT(2) > /* Hardware is V4.3 */ > #define DSI_PHY_7NM_QUIRK_V4_3 BIT(3) > +/* Hardware is V5.2 */ > +#define DSI_PHY_7NM_QUIRK_V5_2 BIT(4) > > struct dsi_pll_config { > bool enable_ssc; > @@ -124,14 +126,25 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config > > if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1) > config->pll_clock_inverters = 0x28; > - else if (pll_freq <= 1000000000ULL) > - config->pll_clock_inverters = 0xa0; > - else if (pll_freq <= 2500000000ULL) > - config->pll_clock_inverters = 0x20; > - else if (pll_freq <= 3020000000ULL) > - config->pll_clock_inverters = 0x00; > - else > - config->pll_clock_inverters = 0x40; > + else if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) { > + if (pll_freq <= 1300000000ULL) > + config->pll_clock_inverters = 0xa0; > + else if (pll_freq <= 2500000000ULL) > + config->pll_clock_inverters = 0x20; > + else if (pll_freq <= 4000000000ULL) > + config->pll_clock_inverters = 0x00; > + else > + config->pll_clock_inverters = 0x40; > + } else { > + if (pll_freq <= 1000000000ULL) > + config->pll_clock_inverters = 0xa0; > + else if (pll_freq <= 2500000000ULL) > + config->pll_clock_inverters = 0x20; > + else if (pll_freq <= 3020000000ULL) > + config->pll_clock_inverters = 0x00; > + else > + config->pll_clock_inverters = 0x40; > + } > > config->decimal_div_start = dec; > config->frac_div_start = frac; > @@ -222,6 +235,13 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll) > vco_config_1 = 0x01; > } > > + if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) { > + if (pll->vco_current_rate < 1557000000ULL) > + vco_config_1 = 0x08; > + else > + vco_config_1 = 0x01; > + } > + > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1, > analog_controls_five_1); > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1); > @@ -860,7 +880,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy, > pr_warn("PLL turned on before configuring PHY\n"); > > /* Request for REFGEN READY */ > - if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) { > + if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) || > + (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) { > dsi_phy_write(phy->base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x1); > udelay(500); > } > @@ -894,7 +915,19 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy, > lane_ctrl0 = 0x1f; > } > > - if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) { > + if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) { > + if (phy->cphy_mode) { > + vreg_ctrl_0 = 0x45; > + vreg_ctrl_1 = 0x45; > + glbl_rescode_top_ctrl = 0x00; > + glbl_rescode_bot_ctrl = 0x00; > + } else { > + vreg_ctrl_0 = 0x44; > + vreg_ctrl_1 = 0x19; > + glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3c : 0x03; > + glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3c; > + } > + } else if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3)) { > if (phy->cphy_mode) { > glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x01; > glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3b; > @@ -943,9 +976,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy, > dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0x00); > > /* program CMN_CTRL_4 for minor_ver 2 chipsets*/ > - data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0); > - data = data & (0xf0); > - if (data == 0x20) > + if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2) || > + (dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0) & (0xf0)) == 0x20) > dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_CTRL_4, 0x04); > > /* Configure PHY lane swap (TODO: we need to calculate this) */ > @@ -1058,7 +1090,8 @@ static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy) > dsi_phy_hw_v4_0_config_lpcdrx(phy, false); > > /* Turn off REFGEN Vote */ > - if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) { > + if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) || > + (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) { > dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x0); > wmb(); > /* Delay to ensure HW removes vote before PHY shut down */ > @@ -1092,6 +1125,10 @@ static const struct regulator_bulk_data dsi_phy_7nm_97800uA_regulators[] = { > { .supply = "vdds", .init_load_uA = 97800 }, > }; > > +static const struct regulator_bulk_data dsi_phy_7nm_98400uA_regulators[] = { > + { .supply = "vdds", .init_load_uA = 98400 }, > +}; > + > const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = { > .has_phy_lane = true, > .regulator_data = dsi_phy_7nm_36mA_regulators, > @@ -1201,3 +1238,26 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = { > .num_dsi_phy = 2, > .quirks = DSI_PHY_7NM_QUIRK_V4_3, > }; > + > +const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs = { > + .has_phy_lane = true, > + .regulator_data = dsi_phy_7nm_98400uA_regulators, > + .num_regulators = ARRAY_SIZE(dsi_phy_7nm_98400uA_regulators), > + .ops = { > + .enable = dsi_7nm_phy_enable, > + .disable = dsi_7nm_phy_disable, > + .pll_init = dsi_pll_7nm_init, > + .save_pll_state = dsi_7nm_pll_save_state, > + .restore_pll_state = dsi_7nm_pll_restore_state, > + .set_continuous_clock = dsi_7nm_set_continuous_clock, > + }, > + .min_pll_rate = 600000000UL, > +#ifdef CONFIG_64BIT > + .max_pll_rate = 5000000000UL, > +#else > + .max_pll_rate = ULONG_MAX, > +#endif > + .io_start = { 0xae95000, 0xae97000 }, > + .num_dsi_phy = 2, > + .quirks = DSI_PHY_7NM_QUIRK_V5_2, > +}; >
| |