lkml.org 
[lkml]   [2023]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 2/3] nvmem: stm32: add OP-TEE support for STM32MP13x
From
Hi,

On 1/4/23 10:24, Etienne Carriere wrote:
> Hello Patrick,
>
> Minor comments only. The overall looks good to me.


thanks for the review,

I will take the comments

Patrick


>
> BR,
> Etienne
>
> On Tue, 3 Jan 2023 at 15:08, Patrick Delaunay
> <patrick.delaunay@foss.st.com> wrote:
>> For boot with OP-TEE on STM32MP13, the communication with the secure
>> world no more use STMicroelectronics SMC but communication with the
>> STM32MP BSEC TA, for data access (read/write) or lock operation:
>> - all the request are sent to OP-TEE trusted application,
>> - for upper OTP with ECC protection and with word programming only
>> each OTP are permanently locked when programmed to avoid ECC error
>> on the second write operation
>>
>> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>> ---
>>
>> Changes in v4:
>> - fixe warning reported by kernel test robot for 64 bits support in
>> drivers/nvmem/stm32-bsec-optee-ta.c:260:18:
>> warning: format '%d' expects argument of type 'int',
>> but argument 4 has type 'size_t'
>>
>> Changes in v3:
>> - add a separate file stm32-bsec-optee-ta.c with STM32MP BSEC TA
>> communication functions to avoid #if in romem driver.
>>
>> Changes in v2:
>> - rebase series on linux-next/master
>> - minor update after V1 revue
>> - add missing sentinel in stm32_romem_of_match()
>> - reorder function and remove prototypes for stm32_bsec_pta... functions
>> - change stm32_bsec_pta_find to static
>> - add return value in dev_err()
>> - cleanups some comments, which can be on one line
>> - remove test on priv->ctx in stm32_bsec_pta_remove
>> - add missing tee_shm_free(shm) in stm32_bsec_pta_write() when
>> tee_shm_get_va failed
>> - return error in stm32_bsec_pta_find when devm_add_action_or_reset failed
>> - handle driver_register error in stm32_romem_init
>>
>> drivers/nvmem/Kconfig | 11 +
>> drivers/nvmem/Makefile | 1 +
>> drivers/nvmem/stm32-bsec-optee-ta.c | 298 ++++++++++++++++++++++++++++
>> drivers/nvmem/stm32-bsec-optee-ta.h | 80 ++++++++
>> drivers/nvmem/stm32-romem.c | 54 ++++-
>> 5 files changed, 441 insertions(+), 3 deletions(-)
>> create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.c
>> create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.h
>>
>> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
>> index 755f551426b5..4d262f69a073 100644
>> --- a/drivers/nvmem/Kconfig
>> +++ b/drivers/nvmem/Kconfig
>> @@ -290,9 +290,20 @@ config NVMEM_SPRD_EFUSE
>> This driver can also be built as a module. If so, the module
>> will be called nvmem-sprd-efuse.
>>
>> +config NVMEM_STM32_BSEC_OPTEE_TA
>> + bool "STM32MP BSEC OP-TEE TA support for nvmem-stm32-romem driver"
>> + depends on OPTEE
>> + help
>> + Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE
>> + trusted application STM32MP BSEC.
>> +
>> + This library is a used by stm32-romem driver or included in the module
>> + called nvmem-stm32-romem.
>> +
>> config NVMEM_STM32_ROMEM
>> tristate "STMicroelectronics STM32 factory-programmed memory support"
>> depends on ARCH_STM32 || COMPILE_TEST
>> + imply NVMEM_STM32_BSEC_OPTEE_TA
>> help
>> Say y here to enable read-only access for STMicroelectronics STM32
>> factory-programmed memory area.
>> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
>> index fa80fe17e567..6a1efffa88f0 100644
>> --- a/drivers/nvmem/Makefile
>> +++ b/drivers/nvmem/Makefile
>> @@ -61,6 +61,7 @@ obj-$(CONFIG_NVMEM_SPRD_EFUSE) += nvmem_sprd_efuse.o
>> nvmem_sprd_efuse-y := sprd-efuse.o
>> obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
>> nvmem_stm32_romem-y := stm32-romem.o
>> +nvmem_stm32_romem-$(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA) += stm32-bsec-optee-ta.o
>> obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o
>> nvmem_sunplus_ocotp-y := sunplus-ocotp.o
>> obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
>> diff --git a/drivers/nvmem/stm32-bsec-optee-ta.c b/drivers/nvmem/stm32-bsec-optee-ta.c
>> new file mode 100644
>> index 000000000000..f566d77f632c
>> --- /dev/null
>> +++ b/drivers/nvmem/stm32-bsec-optee-ta.c
>> @@ -0,0 +1,298 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
>> + *
>> + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#include <linux/tee_drv.h>
>> +
>> +#include "stm32-bsec-optee-ta.h"
>> +
>> +/*
>> + * Read OTP memory
>> + *
>> + * [in] value[0].a OTP start offset in byte
>> + * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
>> + * [out] memref[1].buffer Output buffer to store read values
>> + * [out] memref[1].size Size of OTP to be read
>> + *
>> + * Return codes:
>> + * TEE_SUCCESS - Invoke command success
>> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
>> + */
>> +#define PTA_BSEC_READ_MEM 0x0 /* Read OTP */
> Can remove /* Read OTP */.
>
> Also add possible return code TEE_ERROR_ACCESS_DENIED (ditto for
> PTA_BSEC_WRITE_MEM):
> + * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
>

Ok


>> +
>> +/*
>> + * Write OTP memory
>> + *
>> + * [in] value[0].a OTP start offset in byte
>> + * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
>> + * [in] memref[1].buffer Input buffer to read values
>> + * [in] memref[1].size Size of OTP to be written
>> + *
>> + * Return codes:
>> + * TEE_SUCCESS - Invoke command success
>> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
>> + */
>> +#define PTA_BSEC_WRITE_MEM 0x1 /* Write OTP */
>> +
>> +/* value of PTA_BSEC access type = value[in] b */
>> +#define SHADOW_ACCESS 0
>> +#define FUSE_ACCESS 1
>> +#define LOCK_ACCESS 2
>> +
>> +/* Bitfield definition for LOCK status */
>> +#define LOCK_PERM BIT(30)
>> +
>> +/* OP-TEE STM32MP BSEC TA UUID */
>> +static const uuid_t stm32mp_bsec_ta_uuid =
>> + UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5,
>> + 0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03);
>> +
>> +/*
>> + * Check whether this driver supports the BSEC TA in the TEE instance
>> + * represented by the params (ver/data) to this function.
>> + */
>> +static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver,
>> + const void *data)
>> +{
>> + /* Currently this driver only supports GP compliant, OP-TEE based TA */
>> + if ((ver->impl_id == TEE_IMPL_ID_OPTEE) &&
>> + (ver->gen_caps & TEE_GEN_CAP_GP))
>> + return 1;
>> + else
>> + return 0;
>> +}
>> +
>> +/* Open a session to OP-TEE for STM32MP BSEC TA */
>> +static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id)
>> +{
>> + struct tee_ioctl_open_session_arg sess_arg;
>> + int rc;
>> +
>> + memset(&sess_arg, 0, sizeof(sess_arg));
>> + export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid);
>> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
>> + sess_arg.num_params = 0;
>> +
>> + rc = tee_client_open_session(ctx, &sess_arg, NULL);
>> + if ((rc < 0) || (sess_arg.ret != 0)) {
>> + pr_err("%s: tee_client_open_session failed err:%x, ret:%x\n",
>> + __func__, sess_arg.ret, rc);
>> + if (!rc)
>> + rc = -EINVAL;
>> + } else {
>> + *id = sess_arg.session;
>> + }
>> +
>> + return rc;
>> +}
>> +
>> +/* close a session to OP-TEE for STM32MP BSEC TA */
>> +static void stm32_bsec_ta_close_session(void *ctx, u32 id)
>> +{
>> + tee_client_close_session(ctx, id);
>> +}
>> +
>> +/* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */
>> +int stm32_bsec_optee_ta_open(struct tee_context **ctx)
>> +{
>> + struct tee_context *tee_ctx;
>> + u32 session_id;
>> + int rc;
>> +
>> + /* Open context with TEE driver */
>> + tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL);
>> + if (IS_ERR(tee_ctx)) {
>> + rc = PTR_ERR(tee_ctx);
>> + if (rc == -ENOENT)
>> + return -EPROBE_DEFER;
>> + pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);
>> +
>> + return rc;
>> + }
>> +
>> + /* Check STM32MP BASEC TA presence */
> s/BASEC/BSEC/
thanks
>
>> + rc = stm32_bsec_ta_open_session(tee_ctx, &session_id);
>> + if (rc)
>> + goto out_tee_session;
> Suggestion:
> if (rc) {
> tee_client_close_context(tee_ctx);
> return rc;
> }


ok


>
>> + stm32_bsec_ta_close_session(tee_ctx, session_id);
>> +
>> + *ctx = tee_ctx;
>> +
>> + return 0;
>> +
>> +out_tee_session:
>> + tee_client_close_context(tee_ctx);
>> +
>> + return rc;
>> +}
>> +
>> +/* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */
>> +void stm32_bsec_optee_ta_close(void *ctx)
>> +{
>> + tee_client_close_context(ctx);
>> +}
>> +
>> +/* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */
>> +int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
>> + void *buf, size_t bytes)
>> +{
>> + struct tee_shm *shm;
>> + struct tee_ioctl_invoke_arg arg;
>> + struct tee_param param[2];
>> + u8 *shm_buf;
>> + u32 start, num_bytes;
>> + int ret;
>> + u32 session_id;
>> +
>> + ret = stm32_bsec_ta_open_session(ctx, &session_id);
>> + if (ret)
>> + return ret;
>> +
>> + memset(&arg, 0, sizeof(arg));
>> + memset(&param, 0, sizeof(param));
>> +
>> + arg.func = PTA_BSEC_READ_MEM;
>> + arg.session = session_id;
>> + arg.num_params = 2;
>> +
>> + /* align access on 32bits */
>> + start = ALIGN_DOWN(offset, 4);
>> + num_bytes = round_up(offset + bytes - start, 4);
>> + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
>> + param[0].u.value.a = start;
>> + param[0].u.value.b = SHADOW_ACCESS;
>> +
>> + shm = tee_shm_alloc_kernel_buf(ctx, num_bytes);
>> + if (IS_ERR(shm)) {
>> + ret = PTR_ERR(shm);
>> + goto out_tee_session;
>> + }
>> +
>> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
>> + param[1].u.memref.shm = shm;
>> + param[1].u.memref.size = num_bytes;
>> +
>> + ret = tee_client_invoke_func(ctx, &arg, param);
>> + if (ret < 0 || arg.ret != 0) {
>> + pr_err("TA_BSEC invoke failed TEE err:%x, ret:%x\n",
> Maybe use %#x for hexa print.
ok
>
>> + arg.ret, ret);
>> + if (!ret)
>> + ret = -EIO;
>> + }
>> + if (!ret) {
>> + shm_buf = tee_shm_get_va(shm, 0);
>> + if (IS_ERR(shm_buf)) {
>> + ret = PTR_ERR(shm_buf);
>> + pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
>> + } else {
>> + /* read data from 32 bits aligned buffer */
>> + memcpy(buf, &shm_buf[offset % 4], bytes);
>> + }
>> + }
>> +
>> + tee_shm_free(shm);
>> +
>> +out_tee_session:
>> + stm32_bsec_ta_close_session(ctx, session_id);
>> +
>> + return ret;
>> +}
>> +
>> +/* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */
>> +int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
>> + unsigned int offset, void *buf, size_t bytes)
>> +{ struct tee_shm *shm;
>> + struct tee_ioctl_invoke_arg arg;
>> + struct tee_param param[2];
>> + u8 *shm_buf;
>> + int ret;
>> + u32 session_id;
>> +
>> + ret = stm32_bsec_ta_open_session(ctx, &session_id);
>> + if (ret)
>> + return ret;
>> +
>> + /* Allow only writing complete 32-bits aligned words */
>> + if ((bytes % 4) || (offset % 4))
>> + return -EINVAL;
>> +
>> + memset(&arg, 0, sizeof(arg));
>> + memset(&param, 0, sizeof(param));
>> +
>> + arg.func = PTA_BSEC_WRITE_MEM;
>> + arg.session = session_id;
>> + arg.num_params = 2;
>> +
>> + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
>> + param[0].u.value.a = offset;
>> + param[0].u.value.b = FUSE_ACCESS;
>> +
>> + shm = tee_shm_alloc_kernel_buf(ctx, bytes);
>> + if (IS_ERR(shm)) {
>> + ret = PTR_ERR(shm);
>> + goto out_tee_session;
>> + }
>> +
>> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
>> + param[1].u.memref.shm = shm;
>> + param[1].u.memref.size = bytes;
>> +
>> + shm_buf = tee_shm_get_va(shm, 0);
>> + if (IS_ERR(shm_buf)) {
>> + ret = PTR_ERR(shm_buf);
>> + pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
>> + tee_shm_free(shm);
>> +
>> + goto out_tee_session;
>> + }
>> +
>> + memcpy(shm_buf, buf, bytes);
>> +
>> + ret = tee_client_invoke_func(ctx, &arg, param);
>> + if (ret < 0 || arg.ret != 0) {
>> + pr_err("TA_BSEC invoke failed TEE err:%x, ret:%x\n", arg.ret, ret);
>> + if (!ret)
>> + ret = -EIO;
>> + }
>> + pr_debug("Write OTPs %d to %zu, ret=%d\n", offset / 4, (offset + bytes) / 4, ret);
>> +
>> + /* Lock the upper OTPs with ECC protection, word programming only */
>> + if (!ret && ((offset + bytes) >= (lower * 4))) {
>> + u32 start, nb_lock;
>> + u32 *lock = (u32 *)shm_buf;
>> + int i;
>> +
>> + /*
>> + * don't lock the lower OTPs, no ECC protection and incremental
>> + * bit programming, a second write is allowed
>> + */
>> + start = max_t(u32, offset, lower * 4);
>> + nb_lock = (offset + bytes - start) / 4;
>> +
>> + param[0].u.value.a = start;
>> + param[0].u.value.b = LOCK_ACCESS;
>> + param[1].u.memref.size = nb_lock * 4;
>> +
>> + for (i = 0; i < nb_lock; i++)
>> + lock[i] = LOCK_PERM;
>> +
>> + ret = tee_client_invoke_func(ctx, &arg, param);
>> + if (ret < 0 || arg.ret != 0) {
>> + pr_err("TA_BSEC invoke failed TEE err:%x, ret:%x\n", arg.ret, ret);
>> + if (!ret)
>> + ret = -EIO;
>> + }
>> + pr_debug("Lock upper OTPs %d to %d, ret=%d\n",
>> + start / 4, start / 4 + nb_lock, ret);
>> + }
>> +
>> + tee_shm_free(shm);
>> +
>> +out_tee_session:
>> + stm32_bsec_ta_close_session(ctx, session_id);
>> +
>> + return ret;
>> +}
>> diff --git a/drivers/nvmem/stm32-bsec-optee-ta.h b/drivers/nvmem/stm32-bsec-optee-ta.h
>> new file mode 100644
>> index 000000000000..3966a0535179
>> --- /dev/null
>> +++ b/drivers/nvmem/stm32-bsec-optee-ta.h
>> @@ -0,0 +1,80 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/*
>> + * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
>> + *
>> + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#if IS_ENABLED(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA)
>> +/**
>> + * stm32_bsec_optee_ta_open() - initialize the STM32 BSEC TA
>> + * @ctx: the OP-TEE context on success
>> + *
>> + * Return:
>> + * On success, 0. On failure, -errno.
>> + */
>> +int stm32_bsec_optee_ta_open(struct tee_context **ctx);
>> +
>> +/**
>> + * stm32_bsec_optee_ta_close() - release the STM32 BSEC TA
>> + * @ctx: the OP-TEE context
>> + *
>> + * This function used to clean the OP-TEE resources initialized in
>> + * stm32_bsec_optee_ta_open(); it can be used as callback to
>> + * devm_add_action_or_reset()
>> + */
>> +void stm32_bsec_optee_ta_close(void *ctx);
>> +
>> +/**
>> + * stm32_bsec_optee_ta_read() - nvmem read access using TA client driver
>> + * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
>> + * @offset: nvmem offset
>> + * @buf: buffer to fill with nvem values
>> + * @bytes: number of bytes to read
>> + *
>> + * Return:
>> + * On success, 0. On failure, -errno.
>> + */
>> +int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
>> + void *buf, size_t bytes);
>> +
>> +/**
>> + * stm32_bsec_optee_ta_write() - nvmem write access using TA client driver
>> + * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
>> + * @lower: number of lower OTP, not protected by ECC
>> + * @offset: nvmem offset
>> + * @buf: buffer with nvem values
>> + * @bytes: number of bytes to write
>> + *
>> + * Return:
>> + * On success, 0. On failure, -errno.
>> + */
>> +int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
>> + unsigned int offset, void *buf, size_t bytes);
>> +
>> +#else
>> +
>> +static inline int stm32_bsec_optee_ta_open(struct tee_context **ctx)
>> +{
>> + return -EOPNOTSUPP;
>> +}
>> +
>> +static inline void stm32_bsec_optee_ta_close(void *ctx)
>> +{
>> +}
>> +
>> +static inline int stm32_bsec_optee_ta_read(struct tee_context *ctx,
>> + unsigned int offset, void *buf,
>> + size_t bytes)
>> +{
>> + return -EOPNOTSUPP;
>> +}
>> +
>> +static inline int stm32_bsec_optee_ta_write(struct tee_context *ctx,
>> + unsigned int lower,
>> + unsigned int offset, void *buf,
>> + size_t bytes)
>> +{
>> + return -EOPNOTSUPP;
>> +}
>> +#endif /* CONFIG_NVMEM_STM32_BSEC_OPTEE_TA */
>> diff --git a/drivers/nvmem/stm32-romem.c b/drivers/nvmem/stm32-romem.c
>> index d1d03c2ad081..2edc61925e52 100644
>> --- a/drivers/nvmem/stm32-romem.c
>> +++ b/drivers/nvmem/stm32-romem.c
>> @@ -11,6 +11,9 @@
>> #include <linux/module.h>
>> #include <linux/nvmem-provider.h>
>> #include <linux/of_device.h>
>> +#include <linux/tee_drv.h>
>> +
>> +#include "stm32-bsec-optee-ta.h"
>>
>> /* BSEC secure service access from non-secure */
>> #define STM32_SMC_BSEC 0x82001003
>> @@ -25,12 +28,14 @@
>> struct stm32_romem_cfg {
>> int size;
>> u8 lower;
>> + bool ta;
>> };
>>
>> struct stm32_romem_priv {
>> void __iomem *base;
>> struct nvmem_config cfg;
>> u8 lower;
>> + struct tee_context *ctx;
>> };
>>
>> static int stm32_romem_read(void *context, unsigned int offset, void *buf,
>> @@ -138,12 +143,29 @@ static int stm32_bsec_write(void *context, unsigned int offset, void *buf,
>> return 0;
>> }
>>
>> +static int stm32_bsec_pta_read(void *context, unsigned int offset, void *buf,
>> + size_t bytes)
>> +{
>> + struct stm32_romem_priv *priv = context;
>> +
>> + return stm32_bsec_optee_ta_read(priv->ctx, offset, buf, bytes);
>> +}
>> +
>> +static int stm32_bsec_pta_write(void *context, unsigned int offset, void *buf,
>> + size_t bytes)
>> +{
>> + struct stm32_romem_priv *priv = context;
>> +
>> + return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, buf, bytes);
>> +}
>> +
>> static int stm32_romem_probe(struct platform_device *pdev)
>> {
>> const struct stm32_romem_cfg *cfg;
>> struct device *dev = &pdev->dev;
>> struct stm32_romem_priv *priv;
>> struct resource *res;
>> + int rc;
>>
>> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> if (!priv)
>> @@ -173,15 +195,31 @@ static int stm32_romem_probe(struct platform_device *pdev)
>> } else {
>> priv->cfg.size = cfg->size;
>> priv->lower = cfg->lower;
>> - priv->cfg.reg_read = stm32_bsec_read;
>> - priv->cfg.reg_write = stm32_bsec_write;
>> + if (cfg->ta) {
>> + rc = stm32_bsec_optee_ta_open(&priv->ctx);
>> + /* wait for OP-TEE client driver to be up and ready */
>> + if (rc)
>> + return rc;
>> + rc = devm_add_action_or_reset(dev, stm32_bsec_optee_ta_close, priv->ctx);
>> + if (rc) {
>> + dev_err(dev, "devm_add_action_or_reset() failed (%d)\n", rc);
>> + return rc;
>> + }
>> + }
>> + if (priv->ctx) {
>> + priv->cfg.reg_read = stm32_bsec_pta_read;
>> + priv->cfg.reg_write = stm32_bsec_pta_write;
>> + } else {
>> + priv->cfg.reg_read = stm32_bsec_read;
>> + priv->cfg.reg_write = stm32_bsec_write;
>> + }
>> }
>>
>> return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
>> }
>>
>> /*
>> - * STM32MP15 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
>> + * STM32MP15/13 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
>> * => 96 x 32-bits data words
>> * - Lower: 1K bits, 2:1 redundancy, incremental bit programming
>> * => 32 (x 32-bits) lower shadow registers = words 0 to 31
>> @@ -191,6 +229,13 @@ static int stm32_romem_probe(struct platform_device *pdev)
>> static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
>> .size = 384,
>> .lower = 32,
>> + .ta = false,
>> +};
>> +
>> +static const struct stm32_romem_cfg stm32mp13_bsec_cfg = {
>> + .size = 384,
>> + .lower = 32,
>> + .ta = true,
>> };
>>
>> static const struct of_device_id stm32_romem_of_match[] = {
>> @@ -198,7 +243,10 @@ static const struct of_device_id stm32_romem_of_match[] = {
>> .compatible = "st,stm32mp15-bsec",
>> .data = (void *)&stm32mp15_bsec_cfg,
>> }, {
>> + .compatible = "st,stm32mp13-bsec",
>> + .data = (void *)&stm32mp13_bsec_cfg,
>> },
>> + { /* sentinel */ },
>> };
>> MODULE_DEVICE_TABLE(of, stm32_romem_of_match);
>>
>> --
>> 2.25.1
>>

\
 
 \ /
  Last update: 2023-03-26 23:27    [W:0.153 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site