lkml.org 
[lkml]   [2023]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RESEND PATCH v5 0/2] Add LED driver for flash module in QCOM PMICs
From
Hi Pavel, Jones,

Can you help to review the new flash LED driver changes for Qcom flash
LED module when you are available? It's pending for while.
Thanks

Fenglin

On 2022/12/27 16:15, Fenglin Wu wrote:
> Initial driver and binding document changes for supporting flash LED
> module in Qualcomm Technologies, Inc. PMICs.
>
> Changes in V5:
> 1. Add MODULE_DEVICE_TABLE for auto-loading.
>
> Changes in V4:
> 1. Added Tested-By tag.
> 2. Addressed review comments in the binding change and added
> Reviewed-by tag.
>
> Changes in V3:
> 1. Updated the driver to use regmap_field for register access.
> 2. Adressed the review comments in binding document change.
>
> Changes in V2:
> 1. Addressed review comments in binding change, thanks Krzysztof!
> 2. Updated driver to address the compilation issue reported by
> kernel test robot.
>
> Fenglin Wu (2):
> leds: flash: add driver to support flash LED module in QCOM PMICs
> dt-bindings: leds: add QCOM flash LED controller
>
> .../bindings/leds/qcom,spmi-flash-led.yaml | 116 +++
> drivers/leds/flash/Kconfig | 15 +
> drivers/leds/flash/Makefile | 1 +
> drivers/leds/flash/leds-qcom-flash.c | 701 ++++++++++++++++++
> 4 files changed, 833 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
> create mode 100644 drivers/leds/flash/leds-qcom-flash.c
>

\
 
 \ /
  Last update: 2023-03-26 23:28    [W:0.069 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site