lkml.org 
[lkml]   [2023]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 0/4] Attempt at adding WCN6855 BT support
From
[Cc: Remove undeliverable rjliao@codeaurora.org]

Am 29.01.23 um 22:51 schrieb Steev Klimaszewski:
> This patchset is somewhat of an RFC/RFT, and also just something to get this out
> there.
>
> First things first, I do not have access to the specs nor the schematics, so a
> lot of this was done via guess work, looking at the acpi tables, and looking at
> how a similar device (wcn6750) was added.
>
> There are definitely checkpatch warnings, and I do apologize to those who won't
> review things until there are no warnings for wasting your time.
>
> One example is that I have the vregs commented out, the dt-bindings say that
> they are required since it's based on the wcn6750 work but also like the 6750,
> I've added defaults into the driver, and those seem to work, at least for the
> initial testing.
>
> The end result is that we do have a working device, but not entirely reliable.
>
> Hopefully by getting this out there, people who do have access to the specs or
> schematics can see where the improvements or fixes need to come.
>
> There are a few things that I am not sure why they happen, and don't have the
> knowledge level to figure out why they happen or debugging it.
>
> Bluetooth: hci0: setting up wcn6855
> Bluetooth: hci0: Frame reassembly failed (-84)
> Bluetooth: hci0: QCA Product ID :0x00000013
> Bluetooth: hci0: QCA SOC Version :0x400c0210
> Bluetooth: hci0: QCA ROM Version :0x00000201
> Bluetooth: hci0: QCA Patch Version:0x000038e6
> Bluetooth: hci0: QCA controller version 0x02100201
> Bluetooth: hci0: unexpected event for opcode 0xfc48
> Bluetooth: hci0: Sending QCA Patch config failed (-110)
> Bluetooth: hci0: QCA Downloading qca/hpbtfw21.tlv
> Bluetooth: hci0: QCA Downloading qca/hpnv21g.bin
> Bluetooth: hci0: QCA setup on UART is completed
>
> I do not know why the Frame assembly failed, nor the unexpected event.
>
> Likewise, I'm not entirely sure why it says the patch config send times out, and
> *then* seems to send it?
>
> The BD Address also seems to be incorrect, and I'm not sure what is going on
> there either.
>
> Additionally, I've tried with an additional patch that I'm not including that is
> based on commit 059924fdf6c1 ("Bluetooth: btqca: Use NVM files based on SoC ID
> for WCN3991") to try using the hpnv21g.bin or hpnv21.bin, and the firmware acted
> the same regardless, so I am assuming I don't truly need the "g" firmware on my
> Thinkpad X13s.
>
> Testing was done by connecting a Razer Orochi bluetooth mouse, and using it, as
> well as connecting to and using an H2GO bluetooth speaker and playing audio out
> via canberra-gtk-play as well as a couple of YouTube videos in a browser.
>
> The mouse only seems to work when < 2 ft. from the laptop, and for the speaker, only
> "A2DP Sink, codec SBC" would provide audio output, and while I could see that
> data was being sent to the speaker, it wasn't always outputting, and going >
> 4ft. away, would often disconnect.
>
> steev@wintermute:~$ hciconfig -a
> hci0: Type: Primary Bus: UART
> BD Address: 00:00:00:00:5A:AD ACL MTU: 1024:8 SCO MTU: 240:4
> UP RUNNING PSCAN
> RX bytes:1492 acl:0 sco:0 events:126 errors:0
> TX bytes:128743 acl:0 sco:0 commands:597 errors:0
> Features: 0xff 0xfe 0x8f 0xfe 0xd8 0x3f 0x5b 0x87
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF
> Link mode: PERIPHERAL ACCEPT
> Name: 'wintermute'
> Class: 0x0c010c
> Service Classes: Rendering, Capturing
> Device Class: Computer, Laptop
> HCI Version: (0xc) Revision: 0x0
> LMP Version: (0xc) Subversion: 0x46f7
> Manufacturer: Qualcomm (29)
>
> steev@wintermute:~$ dmesg | grep Razer
> [ 3089.235440] input: Razer Orochi as /devices/virtual/misc/uhid/0005:1532:0056.0003/input/input11
> [ 3089.238580] hid-generic 0005:1532:0056.0003: input,hidraw2: BLUETOOTH HID v0.01 Mouse [Razer Orochi] on 00:00:00:00:5a:ad
> steev@wintermute:~$ dmesg | grep H2GO
> [ 3140.959947] input: H2GO Speaker (AVRCP) as /devices/virtual/input/input12
>
> Bjorn Andersson (1):
> arm64: dts: qcom: sc8280xp: Enable BT
>
> Steev Klimaszewski (3):
> dt-bindings: net: Add WCN6855 Bluetooth bindings
> Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855
> arm64: dts: qcom: thinkpad-x13s: Add bluetooth
>
> .../net/bluetooth/qualcomm-bluetooth.yaml | 2 +
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 68 +++++++++++++++++++
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++
> drivers/bluetooth/btqca.c | 24 ++++++-
> drivers/bluetooth/btqca.h | 10 +++
> drivers/bluetooth/hci_qca.c | 59 ++++++++++++----
> 6 files changed, 162 insertions(+), 15 deletions(-)
>
>
> base-commit: e2f86c02fdc96ca29ced53221a3cbf50aa6f8b49

\
 
 \ /
  Last update: 2023-03-27 00:01    [W:0.099 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site