Messages in this thread Patch in this message | | | From | Oleksij Rempel <> | Subject | [PATCH net-next v3 01/15] net: dsa: microchip: enable EEE support | Date | Mon, 30 Jan 2023 09:07:00 +0100 |
| |
Some of KSZ9477 family switches provides EEE support. To enable it, we just need to register set_mac_eee/set_mac_eee handlers and validate supported chip version and port.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/dsa/microchip/ksz_common.c | 66 ++++++++++++++++++++++++++ 1 file changed, 66 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 5e1e5bd555d2..bef36e2fa257 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2645,6 +2645,70 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) return -EOPNOTSUPP; } +static int ksz_validate_eee(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->info->internal_phy[port]) + return -EOPNOTSUPP; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + return 0; + } + + return -EOPNOTSUPP; +} + +static int ksz_get_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + int ret; + + ret = ksz_validate_eee(ds, port); + if (ret) + return ret; + + /* There is no documented control of Tx LPI configuration. + */ + e->tx_lpi_enabled = true; + /* There is no documented control of Tx LPI timer. According to testes + * Tx LPI timer seems to be set by default to minimal value. + */ + e->tx_lpi_timer = 0; + + return 0; +} + +static int ksz_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct ksz_device *dev = ds->priv; + int ret; + + ret = ksz_validate_eee(ds, port); + if (ret) + return ret; + + if (!e->tx_lpi_enabled) { + dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n"); + return -EINVAL; + } + + if (e->tx_lpi_timer) { + dev_err(dev->dev, "Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + return 0; +} + static void ksz_set_xmii(struct ksz_device *dev, int port, phy_interface_t interface) { @@ -3006,6 +3070,8 @@ static const struct dsa_switch_ops ksz_switch_ops = { .port_hwtstamp_set = ksz_hwtstamp_set, .port_txtstamp = ksz_port_txtstamp, .port_rxtstamp = ksz_port_rxtstamp, + .get_mac_eee = ksz_get_mac_eee, + .set_mac_eee = ksz_set_mac_eee, }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv) -- 2.30.2
| |