lkml.org 
[lkml]   [2023]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] dt-bindings: intel,ixp4xx-expansion-bus: split out peripheral properties
Date
The properties of devices in IXP4xx expansion bus need to be also
applied to actual devices' bindings. Prepare for this by splitting them
to separate intel,ixp4xx-expansion-peripheral-props binding, just like
other memory-controller peripheral properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
...intel,ixp4xx-expansion-bus-controller.yaml | 64 +--------------
...tel,ixp4xx-expansion-peripheral-props.yaml | 80 +++++++++++++++++++
.../mc-peripheral-props.yaml | 1 +
3 files changed, 82 insertions(+), 63 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml

diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
index 5fb4e7bfa4da..a771796ec499 100644
--- a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
+++ b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
@@ -56,69 +56,7 @@ patternProperties:
description: Devices attached to chip selects are represented as
subnodes.
type: object
-
- properties:
- intel,ixp4xx-eb-t1:
- description: Address timing, extend address phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t2:
- description: Setup chip select timing, extend setup phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t3:
- description: Strobe timing, extend strobe phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 15
-
- intel,ixp4xx-eb-t4:
- description: Hold timing, extend hold phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t5:
- description: Recovery timing, extend recovery phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 15
-
- intel,ixp4xx-eb-cycle-type:
- description: The type of cycles to use on the expansion bus for this
- chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
-
- intel,ixp4xx-eb-byte-access-on-halfword:
- description: Allow byte read access on half word devices.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-hpi-hrdy-pol-high:
- description: Set HPI HRDY polarity to active high when using HPI.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-mux-address-and-data:
- description: Multiplex address and data on the data bus.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-ahb-split-transfers:
- description: Enable AHB split transfers.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-write-enable:
- description: Enable write cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-byte-access:
- description: Expansion bus uses only 8 bits. The default is to use
- 16 bits.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
+ $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#

required:
- compatible
diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
new file mode 100644
index 000000000000..8f782c80e88b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Intel IXP4xx Expansion Bus
+
+description: |
+ The IXP4xx expansion bus controller handles access to devices on the
+ memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+ including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ intel,ixp4xx-eb-t1:
+ description: Address timing, extend address phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t2:
+ description: Setup chip select timing, extend setup phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t3:
+ description: Strobe timing, extend strobe phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+
+ intel,ixp4xx-eb-t4:
+ description: Hold timing, extend hold phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t5:
+ description: Recovery timing, extend recovery phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+
+ intel,ixp4xx-eb-cycle-type:
+ description: The type of cycles to use on the expansion bus for this
+ chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ intel,ixp4xx-eb-byte-access-on-halfword:
+ description: Allow byte read access on half word devices.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-hpi-hrdy-pol-high:
+ description: Set HPI HRDY polarity to active high when using HPI.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-mux-address-and-data:
+ description: Multiplex address and data on the data bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-ahb-split-transfers:
+ description: Enable AHB split transfers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-write-enable:
+ description: Enable write cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-byte-access:
+ description: Expansion bus uses only 8 bits. The default is to use
+ 16 bits.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
index 53ae995462db..5acfcad12bb7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -34,5 +34,6 @@ required:
# The controller specific properties go here.
allOf:
- $ref: st,stm32-fmc2-ebi-props.yaml#
+ - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#

additionalProperties: true
--
2.34.1
\
 
 \ /
  Last update: 2023-03-26 23:58    [W:0.121 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site