lkml.org 
[lkml]   [2023]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
From
On 26/01/2023 12:51, Laurent Pinchart wrote:
> On Thu, Jan 26, 2023 at 12:21:06PM +0200, Andy Shevchenko wrote:
>> On Thu, Jan 26, 2023 at 10:41:47AM +0200, Tomi Valkeinen wrote:
>>> On 25/01/2023 17:27, Andy Shevchenko wrote:
>>
>> ...
>>
>>>> But I probably don't understand the ATR structure and what exactly we need to
>>>> pass to it, perhaps it also can be replaced with properties (note, that we have
>>>> some interesting ones that called references, which is an alternative to DT
>>>> phandle).
>>>
>>> Well, maybe this needs a Linux bus implementation. I'm not that familiar
>>> with implementing a bus, but I think that would make it easier to share data
>>> between the deserializer and the serializer. A bus sounds a bit like an
>>> overkill for a 1-to-1 connection, used by a few drivers, but maybe it
>>> wouldn't be too much code.
>>
>> Have you looked at auxiliary bus (appeared a few releases ago in kernel)?
>
> As far as I understand, the auxiliary bus infrastructure is meant for
> use cases where a single hardware device needs to be split into multiple
> logical devices (as in struct device). Platform devices were
> historically (ab)used for this, and the auxiliary bus is meant as a
> cleaner solution. I'm not sure if it would be a good match here, or if
> it would be considered an abuse of the auxiliary bus API.

The aux bus docs say "A key requirement for utilizing the auxiliary bus
is that there is no dependency on a physical bus, device, register
accesses or regmap support. These individual devices split from the core
cannot live on the platform bus as they are not physical devices that
are controlled by DT/ACPI.", which doesn't sound like a good fit.

The deserializer and serializers are currently independent devices and
drivers (the pdata is the only shared thing), but I think we may need
something better here. The devices are more tightly tied together than
"normal" video devices, in my opinion, as the serializer is fully
controlled by the deserializer (including power).

And if we ever want to implement something like power management, we
probably need something more than what we have now. Although I don't
know how that would be done, as all the peripherals behind the
serializer would also lose power...

Tomi

\
 
 \ /
  Last update: 2023-03-26 23:57    [W:0.825 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site