lkml.org 
[lkml]   [2023]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH] tools/memory-model: Make ppo a subrelation of po
    From


    On 1/23/2023 10:10 PM, Alan Stern wrote:
    > On Mon, Jan 23, 2023 at 08:33:42PM +0100, Jonas Oberhauser wrote:
    >>
    >> On 1/23/2023 6:28 PM, Alan Stern wrote:
    >>
    >>>
    >>> I guess one would have to put
    >>>
    >>> (cumul-fence+ ; [W])?
    >>>
    >>> or something like it in the definition.
    >> I suppose it's true that Y being a load would be an exception, but that
    >> would only be if the cumul-fence+ sequence either ends in a strong-fence, or
    >> in po-unlock-lock-po.
    >>
    >> We can ignore the first case (and the ordering would be provided anyways
    >> through pb at that point).
    >> For the po-unlock-lock-po, you can just take Y:=the LKW event of the unlock
    >> and repeat the argument.
    > And yet you complained about the reasoning needed to understand that
    > (pb ; hb) <= pb!

    Eh, I can't help it, my first instinct is always going to be to make
    things shorter :D

    > Not to mention the brittleness of this argument; what
    > if in the future cumul-fence gets another term ending in a load?

    After mulling it over a bit in my big old head, I consider that even
    though dropping the [W] may be shorter, it might make for the simpler
    model by excluding lots of cases.
    That makes me think you should do it for real in the definition of prop.
    And not just at the very end, because in fact each cumul-fence link
    might come from a non-A-cumulative fence. So the same argument you are
    giving should be applied recursively.
    Either

    prop = (overwrite & ext)? ; (cumul-fence; [W])* ; rfe?

    or integrate it directly into cumul-fence.


    >> So I don't think the [W] is necessary. (and if it was maybe it would also be
    >> necessary in the definition of prop/cumul-fence itself, to account for all
    >> the non-A-cumulative fences in there).
    >>
    >> I think part of my weird feeling comes from this asymmetry between A-cumul()
    >> putting the rfe? to the left and prop putting the rfe? to the right. Or more
    >> precisely, that the latter is sometimes in anticipation of an A-cumulative
    >> fence (where the A-cumul would normally take it to the left of that fence)
    >> and sometimes just to express the idea of propagation, and that these are
    >> the same, which should somehow lead to a simpler definition but doesn't.
    > Well, consider that maybe they aren't the same. :-)
    >
    > The definition of prop is a little more complicated than one might
    > expect, because the overwrite and cumul-fence parts are both optional.
    > Leaving one or both of them out is valid, but it requires a little extra
    > thought to see why.
    Let's at this point in time not get started on the overwrite part being
    optional :D (see, this is me successfully holding myself back from
    opening another discussion! I can do it!).

    >
    >>>> I'm not against this partially overlapping kind of redundancy, but I dislike
    >>>> subsuming kind of redundancy where some branches of the logic just never
    >>>> need to be used.
    >>> Consider: Could we remove all propagation-ordering fences from ppo
    >>> because they are subsumed by prop? (Or is that just wrong?)
    >> Surely not, since prop doesn't usually provide ordering by itself.
    > Sorry, I meant the prop-related non-ppo parts of hb and pb.

    I still don't follow :( Can you write some equations to show me what you
    mean?

    >>>>> In fact, I wouldn't mind removing the happens-before, propagation, and
    >>>>> rcu axioms from LKMM entirely, replacing them with the single
    >>>>> executes-before axiom.
    >>>> I was planning to propose the same thing, however, I would also propose to
    >>>> redefine hb and rb by dropping the hb/pb parts at the end of these
    >>>> relations.
    >>>>
    >>>>  hb = ....
    >>>>  pb = prop ; strong-fence ; [Marked]
    >>>>  rb = prop ; rcu-fence ; [Marked]
    >>>>
    >>>>  xb = hb|pb|rb
    >>>>  acyclic xb
    >>> I'm not so sure that's a good idea. For instance, it would require the
    >>> definitions of rcu-link and rb to be changed from having (hb* ; pb*) to
    >>> having (hb | pb)*.
    >> I think that's an improvement. It's obvious that (hb | pb)* is right and so
    >> is (pb | hb)*.
    >> For (hb* ; pb*), the first reaction is "why do all the hb edges need to be
    >> before the pb edges?", until one realizes that pb actually allows hb* at the
    >> end, so in a sense this is  hb* ; (pb ; hb*)*, and then one has to
    >> understand that this means that the prop;strong-fence edges can appear any
    >> number of times at arbitrary locations. It just seems like defining (pb |
    >> hb)* with extra steps.
    > This can be mentioned explicitly as a comment or in explanation.txt.
    Ok, but why not just use  (pb|hb)* and (pb|hb|rb)* and not worry about
    having to explain anything?
    And make the hb and rb definitions simpler at the same time?

    >> The order of nesting seems to be also somewhat a matter of preference,
    >> perhaps in some weird alternative universe the LKMM says pb = (prop\id)&int
    >> | prop;strong-fence  and hb = (rfe | ppo);pb*. (Personally I think the
    >> current way is more reasonable than this one, but that might be because our
    >> preferences happen to align in this instance.)
    > You can't define hb that way, because the definition of hb appears
    > before the definition of pb. And it has to be this way, because hb is
    > used in the definition of pb.
    Note that in that alternative universe,

    pb = (prop\id)&int | prop;strong-fence

    which doesn't require any definition of hb.

    Best wishes,
    jonas

    \
     
     \ /
      Last update: 2023-03-26 23:54    [W:3.790 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site