lkml.org 
[lkml]   [2023]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 8/8] arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity
Date
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 8c64cb060e21..5c510d59c054 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1010,7 +1010,7 @@ &swr0 {
left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
- powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrLeft";
#sound-dai-cells = <0>;
@@ -1019,7 +1019,7 @@ left_spkr: speaker@0,3 {
right_spkr: speaker@0,4 {
compatible = "sdw10217211000";
reg = <0 4>;
- powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrRight";
#sound-dai-cells = <0>;
--
2.34.1
\
 
 \ /
  Last update: 2023-03-26 23:24    [W:0.038 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site