Messages in this thread Patch in this message | | | From | Abel Vesa <> | Subject | [PATCH v2 2/2] arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes | Date | Thu, 19 Jan 2023 02:45:33 +0200 |
| |
Enable USB HC and PHYs nodes on SM8550 MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index b69ded9c4b57..219001473f79 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -447,6 +447,28 @@ &ufs_mem_phy { status = "okay"; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p91>; + + status = "okay"; +}; + &xo_board { clock-frequency = <76800000>; }; -- 2.34.1
| |