lkml.org 
[lkml]   [2023]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V4 0/2] phy: ti: j721e-wiz: Add support to manage type-C swap on Lane2 and lane3
On 13-01-23, 20:36, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
>
> Hi All,
> This series of patch add support to enable lanes 2 and 3 swap by
> configuring the LN23 bit of the SerDes WIZ control register. Also,
> it's possible that the Type-C plug orientation on the DIR line will
> be implemented through hardware design. In that situation, there
> won't be an external GPIO line available, but the driver still needs
> to address this since the DT won't use the typec-dir-gpios property.
> Update code to handle if typec-dir-gpios property is not specified in DT.

Applied, thanks

--
~Vinod

\
 
 \ /
  Last update: 2023-03-26 23:46    [W:0.049 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site