lkml.org 
[lkml]   [2023]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/4] usb: remove OMAP USB Device Controller and OHCI support for OMAP1/2 chips
On Thu, Jan 12, 2023 at 10:03 AM Arnd Bergmann <arnd@arndb.de> wrote:
>
> On Thu, Jan 12, 2023, at 09:37, Lukas Bulwahn wrote:
> > Commit 0fee2eac5c2b ("usb: phy: remove phy-isp1301-omap driver") removes
> > the Philips ISP1301 with OMAP OTG driver and its corresponding config
> > ISP1301_OMAP. The drivers, OMAP USB Device Controller and OHCI support for
> > OMAP1/2 chips, with corresponding configs, USB_OMAP and USB_OHCI_HCD_OMAP1,
> > need this removed driver (see "depends on ISP1301_OMAP") to build.
> >
> > Remove those two drivers.
> >
> > With the config USB_OMAP removed in this commit, remove some further code
> > in the omap-dma header and mach-omap1 architecture code.
> >
> > Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
>
> This would be a great cleanup because of the simplications of the
> omap-dma code. I had previously looked at it and concluded that
> the driver is still in use though, and I think my mistake was
> just in the Kconfig part of this patch:
>
> commit c32fd10914a314dd96c5d24030200070c84df5f1
> Author: Arnd Bergmann <arnd@arndb.de>
> Date: Thu Sep 29 15:38:56 2022 +0200
>
> ARM: omap1: remove unused board files
>
> All board support that was marked as 'unused' earlier can
> now be removed, leaving the five machines that that still
> had someone using them in 2022, or that are supported in
> qemu.
>
> Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: linux-omap@vger.kernel.org
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
> index b3006d8b04ab..95751062078e 100644
> --- a/drivers/usb/gadget/udc/Kconfig
> +++ b/drivers/usb/gadget/udc/Kconfig
> @@ -118,7 +118,7 @@ config USB_GR_UDC
> config USB_OMAP
> tristate "OMAP USB Device Controller"
> depends on ARCH_OMAP1
> - depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
> + depends on ISP1301_OMAP
> help
> Many Texas Instruments OMAP processors have flexible full
> speed USB device controllers, with support for up to 30
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 0442dc4bc334..a0c14c62ff32 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -409,7 +409,7 @@ if USB_OHCI_HCD
> config USB_OHCI_HCD_OMAP1
> tristate "OHCI support for OMAP1/2 chips"
> depends on ARCH_OMAP1
> - depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
> + depends on ISP1301_OMAP
> default y
> help
> Enables support for the OHCI controller on OMAP1/2 chips.
>
> Instead of changing this to 'depends on ISP1301_OMAP', the line
> probably should just be dropped entirely.
>

I see. Yes, probably, !(MACH_OMAP_H2 || MACH_OMAP_H3) is really in the
current state of the repository "always true", and hence this
dependency "depends on ISP1301_OMAP || !(MACH_OMAP_H2 ||
MACH_OMAP_H3)" is always independent of ISP1301_OMAP.

Are you going to fix up your commit "ARM: omap1: remove unused board
files" with this change?

Please ignore this patch then; patch 1 and 4 still seem good to pick, though.

Lukas

\
 
 \ /
  Last update: 2023-03-26 23:37    [W:0.047 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site