lkml.org 
[lkml]   [2023]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH -next V6 5/7] riscv: ftrace: Make ftrace_caller call ftrace_graph_func
From
On 07.01.2023 16:35, guoren@kernel.org wrote:
> From: Song Shuai <suagrfillet@gmail.com>
>
> In order to make the function graph use ftrace directly, ftrace_caller
> should be adjusted to save the necessary regs against the pt_regs layout
> so it can call ftrace_graph_func reasonably.
>
> SAVE_ALL now saves all the regs according to the pt_regs struct. Here
> supersedes SAVE_ALL by SAVE_ABI_REGS which has an extra option to allow
> saving only the necessary ABI-related regs for ftrace_caller.
>
> ftrace_caller and ftrace_regs_caller save their regs with the respective
> option of SAVE_ABI_REGS, then call the tracing function, especially
> graph_ops's ftrace_graph_func. So the ftrace_graph_[regs]_call labels
> aren't needed anymore if FTRACE_WITH_REGS is defined.
>
> As the previous patch described, the ftrace_caller remains with its
> ftrace_graph_call if FTRACE_WITH_REGS isn't defined,
>
> For convenience, the original argument setup for the tracing function in
> ftrace_[regs]_caller is separated as PREPARE_ARGS.
>
> Signed-off-by: Song Shuai <suagrfillet@gmail.com>
> Tested-by: Guo Ren <guoren@kernel.org>
> Signed-off-by: Guo Ren <guoren@kernel.org>
> ---
> arch/riscv/kernel/mcount-dyn.S | 142 ++++++++++++++++++++++++---------
> 1 file changed, 104 insertions(+), 38 deletions(-)
>
> diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
> index b75332ced757..d7d4d51b4bd7 100644
> --- a/arch/riscv/kernel/mcount-dyn.S
> +++ b/arch/riscv/kernel/mcount-dyn.S
> @@ -57,19 +57,52 @@
> .endm
>
> #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> - .macro SAVE_ALL
> +
> +/**
> +* SAVE_ABI_REGS - save regs against the pt_regs struct
> +*
> +* @all: tell if saving all the regs
> +*
> +* If all is set, all the regs will be saved, otherwise only ABI
> +* related regs (a0-a7,epc,ra and optional s0) will be saved.
> +*
> +* After the stack is established,
> +*
> +* 0(sp) stores the PC of the traced function which can be accessed
> +* by &(fregs)->regs->epc in tracing function. Note that the real
> +* function entry address should be computed with -FENTRY_RA_OFFSET.
> +*
> +* 8(sp) stores the function return address (i.e. parent IP) that
> +* can be accessed by &(fregs)->regs->ra in tracing function.
> +*
> +* The other regs are saved at the respective localtion and accessed
> +* by the respective pt_regs member.
> +*
> +* Here is the layout of stack for your reference.
> +*
> +* PT_SIZE_ON_STACK -> +++++++++
> +* + ..... +
> +* + t3-t6 +
> +* + s2-s11+
> +* + a0-a7 + --++++-> ftrace_caller saved
> +* + s1 + +
> +* + s0 + --+
> +* + t0-t2 + +
> +* + tp + +
> +* + gp + +
> +* + sp + +
> +* + ra + --+ // parent IP
> +* sp -> + epc + --+ // PC
> +* +++++++++
> +**/
> + .macro SAVE_ABI_REGS, all=0
> addi sp, sp, -PT_SIZE_ON_STACK
>
> REG_S t0, PT_EPC(sp)
> REG_S x1, PT_RA(sp)
> - REG_S x2, PT_SP(sp)
> - REG_S x3, PT_GP(sp)
> - REG_S x4, PT_TP(sp)
> - REG_S x5, PT_T0(sp)
> - REG_S x6, PT_T1(sp)
> - REG_S x7, PT_T2(sp)
> - REG_S x8, PT_S0(sp)
> - REG_S x9, PT_S1(sp)
> +
> + // always save the ABI regs
> +
> REG_S x10, PT_A0(sp)
> REG_S x11, PT_A1(sp)
> REG_S x12, PT_A2(sp)
> @@ -78,6 +111,18 @@
> REG_S x15, PT_A5(sp)
> REG_S x16, PT_A6(sp)
> REG_S x17, PT_A7(sp)
> +
> + // save the leftover regs
> +
> + .if \all == 1
> + REG_S x2, PT_SP(sp)
> + REG_S x3, PT_GP(sp)
> + REG_S x4, PT_TP(sp)
> + REG_S x5, PT_T0(sp)
> + REG_S x6, PT_T1(sp)
> + REG_S x7, PT_T2(sp)
> + REG_S x8, PT_S0(sp)
> + REG_S x9, PT_S1(sp)
> REG_S x18, PT_S2(sp)
> REG_S x19, PT_S3(sp)
> REG_S x20, PT_S4(sp)
> @@ -92,19 +137,19 @@
> REG_S x29, PT_T4(sp)
> REG_S x30, PT_T5(sp)
> REG_S x31, PT_T6(sp)
> +
> + // save s0 if FP_TEST defined
> +
> + .else
> +#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
> + REG_S x8, PT_S0(sp)
> +#endif
> + .endif
> .endm
>
> - .macro RESTORE_ALL
> + .macro RESTORE_ABI_REGS, all=0
> REG_L t0, PT_EPC(sp)
> REG_L x1, PT_RA(sp)
> - REG_L x2, PT_SP(sp)
> - REG_L x3, PT_GP(sp)
> - REG_L x4, PT_TP(sp)
> - REG_L x5, PT_T0(sp)
> - REG_L x6, PT_T1(sp)
> - REG_L x7, PT_T2(sp)
> - REG_L x8, PT_S0(sp)
> - REG_L x9, PT_S1(sp)
> REG_L x10, PT_A0(sp)
> REG_L x11, PT_A1(sp)
> REG_L x12, PT_A2(sp)
> @@ -113,6 +158,16 @@
> REG_L x15, PT_A5(sp)
> REG_L x16, PT_A6(sp)
> REG_L x17, PT_A7(sp)
> +
> + .if \all == 1
> + REG_L x2, PT_SP(sp)
> + REG_L x3, PT_GP(sp)
> + REG_L x4, PT_TP(sp)
> + REG_L x5, PT_T0(sp)

Same as for the patch #3, please skip "REG_L x5, PT_T0(sp)" here. The
correct value of t0/x5 has already been read from PT_EPC(sp) at this point.

> + REG_L x6, PT_T1(sp)
> + REG_L x7, PT_T2(sp)
> + REG_L x8, PT_S0(sp)
> + REG_L x9, PT_S1(sp)
> REG_L x18, PT_S2(sp)
> REG_L x19, PT_S3(sp)
> REG_L x20, PT_S4(sp)
> @@ -128,10 +183,25 @@
> REG_L x30, PT_T5(sp)
> REG_L x31, PT_T6(sp)
>
> + .else
> +#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
> + REG_L x8, PT_S0(sp)
> +#endif
> + .endif
> addi sp, sp, PT_SIZE_ON_STACK
> .endm
> +
> + .macro PREPARE_ARGS
> + addi a0, t0, -FENTRY_RA_OFFSET // ip
> + la a1, function_trace_op
> + REG_L a2, 0(a1) // op
> + mv a1, ra // parent_ip
> + mv a3, sp // fregs
> + .endm
> +
> #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
>
> +#ifndef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> ENTRY(ftrace_caller)
> SAVE_ABI
>
> @@ -160,33 +230,29 @@ ftrace_graph_call:
> jr t0
> ENDPROC(ftrace_caller)
>
> -#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +#else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
> ENTRY(ftrace_regs_caller)
> - SAVE_ALL
> -
> - addi a0, t0, -FENTRY_RA_OFFSET
> - la a1, function_trace_op
> - REG_L a2, 0(a1)
> - mv a1, ra
> - mv a3, sp
> + SAVE_ABI_REGS 1
> + PREPARE_ARGS
>
> ftrace_regs_call:
> .global ftrace_regs_call
> call ftrace_stub
>
> -#ifdef CONFIG_FUNCTION_GRAPH_TRACER
> - addi a0, sp, PT_RA
> - REG_L a1, PT_T0(sp)
> - addi a1, a1, -FENTRY_RA_OFFSET
> -#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
> - mv a2, s0
> -#endif
> -ftrace_graph_regs_call:
> - .global ftrace_graph_regs_call
> - call ftrace_stub
> -#endif
>
> - RESTORE_ALL
> + RESTORE_ABI_REGS 1
> jr t0
> ENDPROC(ftrace_regs_caller)
> +
> +ENTRY(ftrace_caller)
> + SAVE_ABI_REGS 0
> + PREPARE_ARGS
> +
> +ftrace_call:
> + .global ftrace_call
> + call ftrace_stub
> +
> + RESTORE_ABI_REGS 0
> + jr t0
> +ENDPROC(ftrace_caller)
> #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
> --
> 2.36.1
>
>
Regards,
Evgenii


\
 
 \ /
  Last update: 2023-03-26 23:35    [W:0.154 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site