lkml.org 
[lkml]   [2023]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v8 1/5] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver
From
On 10/01/2023 20:54, Konrad Dybcio wrote:
>
>
> On 10.01.2023 18:56, Konrad Dybcio wrote:
>> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
>>
>> Add the bindings for the CPR3 driver to the documentation.
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
>> [Konrad: Add type reference to acc-syscon; update AGdR's email]
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> ---
> Need to add
>
> qcom,opp-oloop-vadj
> qcom,opp-cloop-vadj

And note that at least for CPR3 they are different between fusing
revisions. I see that for CPRh (esp. for 8998v2) they are the same, but
this is not the case for 8996 (CPR3).

>
> in next revision.
>
> Konrad
>> .../bindings/soc/qcom/qcom,cpr3.yaml | 242 ++++++++++++++++++
>> 1 file changed, 242 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
>> new file mode 100644
>> index 000000000000..52e87061a04b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
>> @@ -0,0 +1,242 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh)
>> +
>> +description: |
>> + CPR (Core Power Reduction) is a technology to reduce core power on a CPU
>> + or other device. Each OPP of a device corresponds to a "corner" that has
>> + a range of valid voltages for a particular frequency. While the device is
>> + running at a particular frequency, CPR monitors dynamic factors such as
>> + temperature, etc. and suggests or, in the CPR-Hardened case performs,
>> + adjustments to the voltage to save power and meet silicon characteristic
>> + requirements.
>> +
>> +maintainers:
>> + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - description: CPRv3 controller
>> + items:
>> + - const: qcom,cpr3
>> + - description: CPRv4 controller
>> + items:
>> + - const: qcom,cpr4
>> + - description: CPRv4-Hardened controller
>> + items:
>> + - enum:
>> + - qcom,msm8998-cprh
>> + - qcom,sdm630-cprh
>> + - const: qcom,cprh
>> +
>> + reg:
>> + description: Base address and size of the CPR controller(s)
>> + minItems: 1
>> + maxItems: 2
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + clock-names:
>> + items:
>> + - const: "ref"
>> +
>> + clocks:
>> + items:
>> + - description: CPR reference clock
>> +
>> + vdd-supply:
>> + description: Autonomous Phase Control (APC) or other power supply
>> +
>> + '#power-domain-cells':
>> + const: 1
>> +
>> + acc-syscon:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description: phandle to syscon for writing ACC settings
>> +
>> + nvmem-cells:
>> + description: Cells containing the fuse corners and revision data
>> + minItems: 10
>> + maxItems: 32
>> +
>> + nvmem-cell-names:
>> + minItems: 10
>> + maxItems: 32
>> +
>> + operating-points-v2: true
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clock-names
>> + - clocks
>> + - "#power-domain-cells"
>> + - nvmem-cells
>> + - nvmem-cell-names
>> + - operating-points-v2
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/qcom,gcc-msm8998.h>
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + cpu@0 {
>> + compatible = "qcom,kryo280";
>> + device_type = "cpu";
>> + reg = <0x0 0x0>;
>> + operating-points-v2 = <&cpu_gold_opp_table>;
>> + power-domains = <&apc_cprh 0>;
>> + power-domain-names = "cprh";
>> + };
>> +
>> + cpu@100 {
>> + compatible = "qcom,kryo280";
>> + device_type = "cpu";
>> + reg = <0x0 0x0>;
>> + operating-points-v2 = <&cpu_silver_opp_table>;
>> + power-domains = <&apc_cprh 1>;
>> + power-domain-names = "cprh";
>> + };
>> + };
>> +
>> + cpu_gold_opp_table: opp-table-gold {
>> + compatible = "operating-points-v2";
>> + opp-shared;
>> +
>> + opp-2208000000 {
>> + opp-hz = /bits/ 64 <2208000000>;
>> + required-opps = <&cprh_opp3>;
>> + };
>> + opp-1113600000 {
>> + opp-hz = /bits/ 64 <1113600000>;
>> + required-opps = <&cprh_opp2>;
>> + };
>> + opp-300000000 {
>> + opp-hz = /bits/ 64 <300000000>;
>> + required-opps = <&cprh_opp1>;
>> + };
>> + };
>> +
>> + cpu_silver_opp_table: opp-table-silver {
>> + compatible = "operating-points-v2";
>> + opp-shared;
>> +
>> + opp-1843200000 {
>> + opp-hz = /bits/ 64 <1843200000>;
>> + required-opps = <&cprh_opp3>;
>> + };
>> + opp-1094400000 {
>> + opp-hz = /bits/ 64 <1094400000>;
>> + required-opps = <&cprh_opp2>;
>> + };
>> + opp-300000000 {
>> + opp-hz = /bits/ 64 <300000000>;
>> + required-opps = <&cprh_opp1>;
>> + };
>> + };
>> +
>> + cprh_opp_table: opp-table-cprh {
>> + compatible = "operating-points-v2-qcom-level";
>> +
>> + cprh_opp1: opp1 {
>> + opp-level = <1>;
>> + qcom,opp-fuse-level = <1>;
>> + };
>> + cprh_opp2: opp2 {
>> + opp-level = <2>;
>> + qcom,opp-fuse-level = <2>;
>> + };
>> + cprh_opp3: opp3 {
>> + opp-level = <3>;
>> + qcom,opp-fuse-level = <2 3>;
>> + };
>> + };
>> +
>> + apc_cprh: power-controller@179c8000 {
>> + compatible = "qcom,msm8998-cprh", "qcom,cprh";
>> + reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>;
>> + clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
>> + clock-names = "ref";
>> +
>> + #power-domain-cells = <1>;
>> + operating-points-v2 = <&cprh_opp_table>;
>> +
>> + nvmem-cells = <&cpr_efuse_speedbin>,
>> + <&cpr_fuse_revision>,
>> + <&cpr_quot0_pwrcl>,
>> + <&cpr_quot1_pwrcl>,
>> + <&cpr_quot2_pwrcl>,
>> + <&cpr_quot3_pwrcl>,
>> + <&cpr_quot_offset1_pwrcl>,
>> + <&cpr_quot_offset2_pwrcl>,
>> + <&cpr_quot_offset3_pwrcl>,
>> + <&cpr_init_voltage0_pwrcl>,
>> + <&cpr_init_voltage1_pwrcl>,
>> + <&cpr_init_voltage2_pwrcl>,
>> + <&cpr_init_voltage3_pwrcl>,
>> + <&cpr_ro_sel0_pwrcl>,
>> + <&cpr_ro_sel1_pwrcl>,
>> + <&cpr_ro_sel2_pwrcl>,
>> + <&cpr_ro_sel3_pwrcl>,
>> + <&cpr_quot0_perfcl>,
>> + <&cpr_quot1_perfcl>,
>> + <&cpr_quot2_perfcl>,
>> + <&cpr_quot3_perfcl>,
>> + <&cpr_quot_offset1_perfcl>,
>> + <&cpr_quot_offset2_perfcl>,
>> + <&cpr_quot_offset3_perfcl>,
>> + <&cpr_init_voltage0_perfcl>,
>> + <&cpr_init_voltage1_perfcl>,
>> + <&cpr_init_voltage2_perfcl>,
>> + <&cpr_init_voltage3_perfcl>,
>> + <&cpr_ro_sel0_perfcl>,
>> + <&cpr_ro_sel1_perfcl>,
>> + <&cpr_ro_sel2_perfcl>,
>> + <&cpr_ro_sel3_perfcl>;
>> +
>> + nvmem-cell-names = "cpr_speed_bin",
>> + "cpr_fuse_revision",
>> + "cpr0_quotient1",
>> + "cpr0_quotient2",
>> + "cpr0_quotient3",
>> + "cpr0_quotient4",
>> + "cpr0_quotient_offset2",
>> + "cpr0_quotient_offset3",
>> + "cpr0_quotient_offset4",
>> + "cpr0_init_voltage1",
>> + "cpr0_init_voltage2",
>> + "cpr0_init_voltage3",
>> + "cpr0_init_voltage4",
>> + "cpr0_ring_osc1",
>> + "cpr0_ring_osc2",
>> + "cpr0_ring_osc3",
>> + "cpr0_ring_osc4",
>> + "cpr1_quotient1",
>> + "cpr1_quotient2",
>> + "cpr1_quotient3",
>> + "cpr1_quotient4",
>> + "cpr1_quotient_offset2",
>> + "cpr1_quotient_offset3",
>> + "cpr1_quotient_offset4",
>> + "cpr1_init_voltage1",
>> + "cpr1_init_voltage2",
>> + "cpr1_init_voltage3",
>> + "cpr1_init_voltage4",
>> + "cpr1_ring_osc1",
>> + "cpr1_ring_osc2",
>> + "cpr1_ring_osc3",
>> + "cpr1_ring_osc4";
>> + };
>> +...

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-03-26 23:35    [W:0.103 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site