lkml.org 
[lkml]   [2022]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] usb: mtu3: add support controller reset
Date
Add support controller reset via a reset-controller usually in infracfg,
it's different with the software reset by IPPC which only used to reset MAC,
and it will also reset IPPC meanwhile.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/mtu3/mtu3_plat.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 4309ed939178..d14494b30064 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -13,6 +13,7 @@
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/pm_wakeirq.h>
+#include <linux/reset.h>

#include "mtu3.h"
#include "mtu3_dr.h"
@@ -345,6 +346,12 @@ static int mtu3_probe(struct platform_device *pdev)
dev_info(dev, "wakeup irq %d\n", ssusb->wakeup_irq);
}

+ ret = device_reset_optional(dev);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to reset controller\n");
+ goto comm_exit;
+ }
+
ssusb_ip_sw_reset(ssusb);

if (IS_ENABLED(CONFIG_USB_MTU3_HOST))
--
2.18.0
\
 
 \ /
  Last update: 2022-05-23 11:07    [W:0.083 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site