lkml.org 
[lkml]   [2021]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS
On Fri, Mar 26, 2021 at 03:58:11PM +0100, Bartosz Dudziak wrote:
> This series of patches enables to boot MSM8226 SoC in Samsung Galaxy S III Neo
> mobile phone. Implemented clocks are on top of MSM8974 GCC driver because there
> is really little difference between them. UART serial communication is working.
> I have working patches for the regulators, EMMC, multithreading and Wifi for
> this device but they are not clean and ready to submit.
>
> Bartosz Dudziak (5):
> dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
> clk: qcom: gcc: Add support for Global Clock controller found on
> MSM8226
> arm: dts: qcom: Add support for MSM8226 SoC
> dt-bindings: arm: qcom: Document MSM8226 SoC binding
> arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo
> phone
>
> .../devicetree/bindings/arm/qcom.yaml | 6 +
> .../devicetree/bindings/clock/qcom,gcc.yaml | 13 +-
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 25 +++
> arch/arm/boot/dts/qcom-msm8226.dtsi | 152 ++++++++++++++
> drivers/clk/qcom/gcc-msm8974.c | 185 ++++++++++++++++--
> 6 files changed, 364 insertions(+), 18 deletions(-)
> create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
> create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi
>
> --
> 2.25.1
>

I have sent version V2 of the patches

\
 
 \ /
  Last update: 2021-04-18 15:01    [W:0.092 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site