lkml.org 
[lkml]   [2021]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] thermal: qcom: tsens_v1: Enable sensor 3 on MSM8976
From
Date


On 2/25/21 4:31 PM, Konrad Dybcio wrote:
> The sensor *is* in fact used and does report temperature.

I can't find any info that says otherwise. So,

Acked-by: Thara Gopinath <thara.gopinath@linaro.org>

Warm Regards
Thara

>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
> drivers/thermal/qcom/tsens-v1.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index 3c19a3800c6d..573e261ccca7 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -380,11 +380,11 @@ static const struct tsens_ops ops_8976 = {
> .get_temp = get_temp_tsens_valid,
> };
>
> -/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
> +/* Valid for both MSM8956 and MSM8976. */
> struct tsens_plat_data data_8976 = {
> .num_sensors = 11,
> .ops = &ops_8976,
> - .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
> + .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
> .feat = &tsens_v1_feat,
> .fields = tsens_v1_regfields,
> };
>

--
Warm Regards
Thara

\
 
 \ /
  Last update: 2021-03-17 19:24    [W:0.071 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site