lkml.org 
[lkml]   [2021]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 4/4] arm64: dts: qcom: sc7180: trogdor: Use ADC TM channel 0 instead of 1 for charger temperature
From
Date
Quoting Matthias Kaehlcke (2021-02-25 10:33:37)
> On trogdor the ADC thermal monitor is used for monitoring certain
> device temperatures. All trogdor boards have at least a thermistor
> for the charger temperature, optionally they may have others.
>
> Currently the ADC thermal monitor is configured to use channel 1
> for the charger temperature. Given that all trogdor boards have
> the charger thermistor it makes more sense to use channel 0,
> and then let boards with other thermistors use channels 1, 2, 3,
> rather than 0, 2, 3.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

>
> Changes in v2:
> - patch added to the series
>
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index ab4efaece5cb..58e127b6ba1e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -19,7 +19,7 @@ charger_thermal: charger-thermal {
> polling-delay-passive = <0>;
> polling-delay = <0>;
>
> - thermal-sensors = <&pm6150_adc_tm 1>;
> + thermal-sensors = <&pm6150_adc_tm 0>;

Too bad this can't point at the sensor "config" node itself. Looks error prone!

>
> trips {
> charger-crit {
> @@ -718,8 +718,8 @@ charger-thermistor@4f {
> &pm6150_adc_tm {
> status = "okay";
>
> - charger-thermistor@1 {
> - reg = <1>;
> + charger-thermistor@0 {
> + reg = <0>;
> io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
> qcom,ratiometric;
> qcom,hw-settle-time-us = <200>;

\
 
 \ /
  Last update: 2021-02-25 23:44    [W:0.073 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site