Messages in this thread | | | Date | Mon, 6 Dec 2021 07:07:59 -0800 | From | Bjorn Andersson <> | Subject | Re: [PATCH v3 4/4] arm64: dts: qcom: sdm845-db845c: Remove clock-lanes property from &camss node |
| |
On Thu 18 Nov 04:48 PST 2021, Robert Foss wrote:
> The clock-lanes property is no longer used as it is not programmable by > the CSIPHY hardware block of Qcom ISPs and should be removed. > > Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards, Bjorn
> --- > arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > index 13f80a0b6faa..2cf4b932aee2 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > @@ -1125,7 +1125,6 @@ ports { > port@0 { > reg = <0>; > csiphy0_ep: endpoint { > - clock-lanes = <7>; > data-lanes = <0 1 2 3>; > remote-endpoint = <&ov8856_ep>; > }; > @@ -1166,7 +1165,6 @@ camera@10 { > > port { > ov8856_ep: endpoint { > - clock-lanes = <1>; > link-frequencies = /bits/ 64 > <360000000 180000000>; > data-lanes = <1 2 3 4>; > @@ -1211,7 +1209,6 @@ camera@60 { > > port { > ov7251_ep: endpoint { > - clock-lanes = <1>; > data-lanes = <0 1>; > // remote-endpoint = <&csiphy3_ep>; > }; > -- > 2.32.0 >
| |