lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 3/5] clk: qcom: Add SDX65 GCC support
On Thu, Dec 02, 2021 at 04:20:09PM -0800, Stephen Boyd wrote:
> Quoting quic_vamslank@quicinc.com (2021-12-01 16:21:33)
> > +static struct clk_branch gcc_gp3_clk = {
> > + .halt_reg = 0x39000,
> > + .halt_check = BRANCH_HALT,
> > + .clkr = {
> > + .enable_reg = 0x39000,
> > + .enable_mask = BIT(0),
> > + .hw.init = &(struct clk_init_data){
> > + .name = "gcc_gp3_clk",
> > + .parent_data = &(const struct clk_parent_data){
> > + .hw = &gcc_gp3_clk_src.clkr.hw,
> > + },
> > + .num_parents = 1,
> > + .flags = CLK_SET_RATE_PARENT,
> > + .ops = &clk_branch2_ops,
> > + },
> > + },
> > +};
> > +
> > +static struct clk_branch gcc_pcie_0_clkref_en = {
> > + .halt_reg = 0x88004,
> > + /* The clock controller does not handle the status bit for
>
> Please leave /* on it's own line for multiline comments.

Will do.

>
> > + * the clocks with gdscs(powerdomains) in hw controlled mode
> > + * and hence avoid checking for the status bit of those clocks
> > + * by setting the BRANCH_HALT_DELAY flag */
>
> And */ too

Will do.

>
> > + .halt_check = BRANCH_HALT_DELAY,
> > + .clkr = {
> > + .enable_reg = 0x88004,
> > + .enable_mask = BIT(0),
> > + .hw.init = &(struct clk_init_data){
> > + .name = "gcc_pcie_0_clkref_en",
> > + .ops = &clk_branch2_ops,
> > + },
> > + },
> > +};

Thanks,
Vamsi

\
 
 \ /
  Last update: 2021-12-07 05:32    [W:0.034 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site