lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v5 3/5] watchdog: da9062: reset board on watchdog timeout
Date
On 06 December 2021 06:48, Andrej Picej wrote:

> Implement a method to change watchdog timeout configuration based on DT
> binding ("dlg,wdt-sd"). There is a possibility to change the behaviour
> of watchdog reset. Setting WATCHDOG_SD bit enables SHUTDOWN mode, and
> clearing it enables POWERDOWN mode on watchdog timeout.
>
> If no DT binding is specified the WATCHDOG_SD bit stays in default
> configuration, not breaking behaviour of devices which might depend on
> default fuse configuration.
>
> Note: This patch requires that the config register CONFIG_I is
> configured as writable in the da9061/2 multi function device.
>
> Signed-off-by: Andrej Picej <andrej.picej@norik.com>
> ---

Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>

\
 
 \ /
  Last update: 2021-12-06 21:17    [W:0.084 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site