lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 07/20] power: supply: bq25890: Enable charging on boards where we skip reset
Date
On boards where the "linux,skip-reset" boolean property is set we don't
reset the charger; and on some boards where the fw takes care of
initalizition F_CHG_CFG is set to 0 before handing control over to the OS.

Explicitly set F_CHG_CFG to 1 on boards where we don't reset the charger,
so that charging is always enabled on these boards, like it is always
enabled on boards where we do reset the charger.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/power/supply/bq25890_charger.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index f758e28046e5..d185299db9c3 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -747,6 +747,17 @@ static int bq25890_hw_init(struct bq25890_device *bq)
dev_dbg(bq->dev, "Reset failed %d\n", ret);
return ret;
}
+ } else {
+ /*
+ * Ensure charging is enabled, on some boards where the fw
+ * takes care of initalizition F_CHG_CFG is set to 0 before
+ * handing control over to the OS.
+ */
+ ret = bq25890_field_write(bq, F_CHG_CFG, 1);
+ if (ret < 0) {
+ dev_dbg(bq->dev, "Enabling charging failed %d\n", ret);
+ return ret;
+ }
}

/* disable watchdog */
--
2.33.1
\
 
 \ /
  Last update: 2021-12-06 10:35    [W:0.096 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site