Messages in this thread | | | From | Vladimir Oltean <> | Subject | Re: [PATCH] powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch | Date | Fri, 31 Dec 2021 12:52:53 +0000 |
| |
On Thu, Dec 30, 2021 at 04:24:38PM +0300, Maxim Kiselev wrote: > Yes, I have T1040RDB ver.b (without SFP) and my front panel looks like this. > > +---------------------------------------------------------------------+ > | NO SFP | > | +-------+-------+ | +-------+-------+-------+-------+ | > | | UART0 | ETH1 | | | ETH4 | ETH6 | ETH8 | ETH10 | | > | +-------+-------+ \|/ +-------+-------+-------+-------+-------+ | > | | UART1 | ETH0 | | ETH2 | ETH3 | ETH5 | ETH7 | ETH9 | | > +--+-------+-------+-------+-------+-------+-------+-------+-------+--+ > > Same as this pic > https://habrastorage.org/files/433/d0f/057/433d0f05784f42b6acf9bb777970b1e9.jpg
I am not yet sure how to solve this. I don't really know what revision my board is. I didn't know that there are multiple revisions that are different in this regard, either. (one would expect that a Freescale/NXP employee like me should know better, no?) The reason why I'm not sure at all is because the SFP cage on my PCB isn't populated either, yet the front panel is carved out for it. See the attached picture. Do I have a rev B board mounted in a different chassis (although it says T1040RDB)? Was there a board revision with an actual SFP cage populated? I don't know, and I cannot really ask around right now, since most everybody is on holiday. In the schematics for the board rev B that I have, it says that the SFP cage should have been populated, so this is strange (although it also says "T2081 ONLY!"). [unhandled content-type:image/jpeg] | |