lkml.org 
[lkml]   [2021]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC][PATCH 6/6] objtool: Add IBT validation / fixups
On 2021-11-22 09:03, Peter Zijlstra wrote:
> Objtool based IBT validation in 3 passes:
>
> --ibt-fix-direct:
>
> Detect and rewrite any code/reloc from a JMP/CALL instruction
> to an ENDBR instruction. This is basically a compiler bug since
> neither needs the ENDBR and decoding it is a pure waste of time.
>
> --ibt:
>
> Report code relocs that are not JMP/CALL and don't point to ENDBR
>
> There's a bunch of false positives, for eg. static_call_update()
> and copy_thread() and kprobes. But most of them were due to
> _THIS_IP_ which has been taken care of with the prior annotation.
>
> --ibt-seal:
>
> Find and NOP superfluous ENDBR instructions. Any function that
> doesn't have it's address taken should not have an ENDBR
> instruction. This removes about 1-in-4 ENDBR instructions.
>

I did some experimentation with compiler-based implementation for two of
the features described here (plus an additional one). Before going into
details, just a quick highlight that the compiler has limited visibility
over handwritten assembly sources thus, depending on the feature, a
compiler-based approach will not cover as much as objtool. All the
observations below were made when compiling the kernel with defconfig, +
CLANG-related options, + LTO sometimes. Here I used kernel revision
0fcfb00b28c0b7884635dacf38e46d60bf3d4eb1 with PeterZ's IBT Beginning
patches applied on top (plus changes to Kbuild), thus, IBT was not
really enforced. Tests consisted mostly of Clang's synthetics tests +
booting a compiled kernel.

Prototypes of the features are available in:
https://github.com/lvwr/llvm/tree/joao/ibt -- I fixed as many corner
cases I could find while trying it out, but I believe some might still
be haunting. Also, I'm not very keen to Kbuild internals nor to however
the kernel patches itself during runtime, so I may have missed some
details.

Finally, I'm interested in general feedback about this... better ways of
implementing, alternative approaches, new possible optimizations and
everything. I should be AFK for a few days in the next weeks, but I'll
be glad to discuss this in January and then. Happy Holidays :)

The features:

-mibt-seal:

Add ENDBRs exclusively to address-taken functions regardless of its
linkage visibility. Only make sense together with LTO.

Observations: Reduced drastically the number of ENDBRs placed in the
kernel binary (From 44383 to 33192), but still missed some that were
later fixed by objtool (Number of fixes by objtool reduced from 11730 to
540). I did not investigate further why these superfluous ENDBRs were
still left in the binary, but at this point my hypotheses spin around
(i) false-positive address-taken conclusions by the compiler, possibly
due to things like exported symbols and such; (ii) assembly sources
which are invisible to the compiler (although this would more likely
hide address taken functions); (iii) other binary level transformations
done by objtool.

Runtime testing: The kernel was verified to properly boot after being
compiled with -mibt-seal (+ LTO).

Note: This feature was already submitted for upstreaming with the
llvm-project: https://reviews.llvm.org/D116070

-mibt-fix-direct:

Direct calls to functions which are known to have ENDBR instructions are
fixed to target the first instruction after the ENDBR (+4 offset). Does
not necessarily depend on LTO, but is meaningfully improved by it
because it depends on after-linking stuff to successfully identify
targets that will have ENDBRs (aliases and assembly functions are a big
complication here, so this currently won't try to optimize calls to
functions which exist in the compiler context as declarations).

Observations: I did a quick change on objtool to collect stats on the
number of fixes applied. Without -mibt-fix-direct objtool had to fix
227552 direct calls/jmps. Without LTO, -mibt-fix-direct reduced this
number to 218455. With LTO this number was reduced to 1728.

Runtime testing: The kernel was verified to properly boot when compiled
with -mibt-fix-direct both with and without LTO. I tried a more
aggressive approach for non-LTO compilation, which was trying to
optimize based on declarations (when functions were not visible) and
noticed that in this scenario the kernel would crash very early in the
boot process. I did not investigate further, but my hypothesis is that
this approach mistakenly optimizes calls to assembly functions without
ENDBRs, leading to random weirdness and doom.

-mibt-preceding-endbr:

Instead of placing ENDBRs after the function entry label, place it right
before. Indirect calls are fixed (using a sub instr) to target 4 bytes
before the function entry point. Address values which are reused after
the indirect call are fixed back to their original value (using an add
instr). Indirect calls that use in-memory pointers are transformed to
first load the function pointer from memory into a free register, then
do the sub, then call it. This does not depend on LTO.

Runtime testing: The runtime test was done using a kernel whose asm
functions were not fixed regarding the position of ENDBRs. Yet, perhaps
surprisingly, the kernel still boots when compiled with
-mibt-preceding-endbr. I don't really know how many indirect calls to
assembly functions happened, but I assume that these would have crashed
if IBT was being enforced due to the misplaced ENDBRs (and it could also
have crashed in these early tests due to indirect calls targeting
unknown instruction 4 bytes before assembly functions, thus the surprise
factor when I saw the kernel booting). Kernel booted alright with
-mibt-preceding-endbr with and without LTO. CONFIG_RETPOLINE was
disabled for testing this.

\
 
 \ /
  Last update: 2021-12-24 03:06    [W:0.411 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site