lkml.org 
[lkml]   [2020]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 09/10] arm64: tegra: Audio graph header for Tegra210
From
Date

On 7/20/2020 10:21 AM, Kuninori Morimoto wrote:
> External email: Use caution opening links or attachments
>
>
> Hi Sameer
>
>>>> +&tegra_admaif {
>>>> + admaif_port: port {
>>>> + admaif0: endpoint@0 {
>>>> + remote-endpoint = <&xbar_admaif0>;
>>>> + };
>>>> + admaif1: endpoint@1 {
>>>> + remote-endpoint = <&xbar_admaif1>;
>>>> + };
>>> (snip)
>>>> + admaif8: endpoint@8 {
>>>> + remote-endpoint = <&xbar_admaif8>;
>>>> + };
>>>> + admaif9: endpoint@9 {
>>>> + remote-endpoint = <&xbar_admaif9>;
>>>> + };
>>>> + };
>>>> +};
>>> I'm not familiar with your system, so, one question.
>>> Does this ADMAIF has total 10 interface which is used in the same time ?
>>> or select one of 10 connections when use ?
>> One ore more ADMAIF interfaces can be used simultaneously. In fact all
>> of them can be used at the same time.
> Ah, sorry my questoin was not correct.
> I want to clarify was that below.
>
> In my understanding,
> if your system has 10 interfaces,
> you need to create 10 ports, not 10 endpoints.
> If your system has 1 interface, but is connected from 10
> devices, it has 1 port 10 endpoints.

OK, I see your point. I will work on re-organizing ports/endpoints and
once tested will publish V2 for current series. Thanks for inputs.

>
> Thank you for your help !!
>
> Best regards
> ---
> Kuninori Morimoto

\
 
 \ /
  Last update: 2020-08-03 14:07    [W:0.063 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site