lkml.org 
[lkml]   [2020]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 12/14] usb: typec: tcpm: Implement enabling Auto Discharge disconnect support
On Mon, Aug 24, 2020 at 09:22:08PM -0700, Badhri Jagan Sridharan wrote:
> TCPCI spec allows TCPC hardware to autonomously discharge the vbus
> capacitance upon disconnect. The expectation is that the TCPM enables
> AutoDischargeDisconnect while entering SNK/SRC_ATTACHED states. Hardware
> then automously discharges vbus when the vbus falls below a certain
> threshold i.e. VBUS_SINK_DISCONNECT_THRESHOLD.
>
> Apart from enabling the vbus discharge circuit, AutoDischargeDisconnect
> is also used a flag to move TCPCI based TCPC implementations into
> Attached.Snk/Attached.Src state as mentioned in
> Figure 4-15. TCPC State Diagram before a Connection of the
> USB Type-C Port Controller Interface Specification.
> In such TCPC implementations, setting AutoDischargeDisconnect would
> prevent TCPC into entering "Connection_Invalid" state as well.
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
> Change-Id: I09c407eb228d69eb1259008eeb14c429b0fda765

It looks like this patch is also formated a bit differently compared
to the others.

thanks,

--
heikki

\
 
 \ /
  Last update: 2020-08-28 16:13    [W:0.084 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site