lkml.org 
[lkml]   [2020]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: stm32: add resets property to spi device nodes on stm32h743
From
Date
Hi Tobias

On 8/15/20 12:35 AM, Tobias Schramm wrote:
> The stm32 spi driver tries to determine the fifo size of spi devices
> dynamically. However, if the spi was already configured by the bootloader
> the fifo size check can become an endless loop, because the driver
> expects the spi to be in its initial "after device reset" state. The
> driver does already support resetting the spi device at probe, thus this
> patch adds only the required device tree properties
>
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>

Applied on stm32-next.

Thanks.
Alex

\
 
 \ /
  Last update: 2020-08-28 11:54    [W:0.025 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site