lkml.org 
[lkml]   [2020]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 09/17] arm64: dts: mt8183: add encoder node
From
Date
Hi Alexandre,

On 27/08/2020 12:10, Alexandre Courbot wrote:
> On Thu, Aug 27, 2020 at 7:03 PM Matthias Brugger <matthias.bgg@gmail.com> wrote:
>>
>>
>>
>> On 21/08/2020 12:36, Alexandre Courbot wrote:
>>> Now that the MT8183 encoder driver is ready, add its DT node. Also pull
>>> the iommu and scp ones, which the encoder depends upon.
>>
>> Please don't do that. Instead of pulling in other DT nodes, it would be handy to
>> get a reference of the series this is based on.
>>
>> Let me try to hunt them down now :)
>
> Sorry, I'm not sure to understand - do you mean each node should come
> with its own patch? Or that all the code should be merged before
> sending these nodes? The rest of this series should land into the
> media tree soon, if you prefer I can resend this patch separately once
> that happens.
>

What I'm talking about is the case when you send a series that's based on
another one and the latter is not yet accepted in Torvalds tree. In that case it
helps to point to the series you expect to be included as well.

In this case the SCP series was merged long time ago, but I missed the DTS
change. It would have been good if you would have added that information in your
series, instead of directly pulling in the SCP node.

For the iommu node: I understand that there was never a patch adding the node
(at least I wasn't able to find one). So I'd prefer to have it send as a
separate patch of this series.

Regarding this series now. If you want just resend the two DTS patches (iommu
and vcodec_enc) once the rest of this series got accpeted. If for any other
reason you have to send a v5, then feel free to include both in v5.

Hope I explained myself now :)

Regards,
Matthias

>>
>> Regards,
>> Matthias
>>
>>>
>>> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
>>> ---
>>> arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 10 ++++++
>>> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 12 +++++++
>>> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 36 +++++++++++++++++++
>>> 3 files changed, 58 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
>>> index ae405bd8f06b..9e77b420eee8 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
>>> @@ -25,6 +25,16 @@ memory@40000000 {
>>> chosen {
>>> stdout-path = "serial0:921600n8";
>>> };
>>> + reserved-memory {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> + scp_mem_reserved: scp_mem_region {
>>> + compatible = "shared-dma-pool";
>>> + reg = <0 0x50000000 0 0x2900000>;
>>> + no-map;
>>> + };
>>> + };
>>> };
>>>
>>> &auxadc {
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>>> index f0a070535b34..3c763be658da 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>>> @@ -90,6 +90,18 @@ pp3300_alw: regulator6 {
>>> regulator-max-microvolt = <3300000>;
>>> };
>>>
>>> + reserved_memory: reserved-memory {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + scp_mem_reserved: scp_mem_region {
>>> + compatible = "shared-dma-pool";
>>> + reg = <0 0x50000000 0 0x2900000>;
>>> + no-map;
>>> + };
>>> + };
>>> +
>>> max98357a: codec0 {
>>> compatible = "maxim,max98357a";
>>> sdmode-gpios = <&pio 175 0>;
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>> index 102105871db2..8f77eea6df27 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>> @@ -8,6 +8,7 @@
>>> #include <dt-bindings/clock/mt8183-clk.h>
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> #include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/memory/mt8183-larb-port.h>
>>> #include <dt-bindings/reset-controller/mt8183-resets.h>
>>> #include <dt-bindings/phy/phy.h>
>>> #include "mt8183-pinfunc.h"
>>> @@ -339,6 +340,25 @@ pwrap: pwrap@1000d000 {
>>> clock-names = "spi", "wrap";
>>> };
>>>
>>> + iommu: iommu@10205000 {
>>> + compatible = "mediatek,mt8183-m4u";
>>> + reg = <0 0x10205000 0 0x1000>;
>>> + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
>>> + #iommu-cells = <1>;
>>> + };
>>> +
>>> + scp: scp@10500000 {
>>> + compatible = "mediatek,mt8183-scp";
>>> + reg = <0 0x10500000 0 0x80000>,
>>> + <0 0x105c0000 0 0x19080>;
>>> + reg-names = "sram", "cfg";
>>> + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&infracfg CLK_INFRA_SCPSYS>;
>>> + clock-names = "main";
>>> + memory-region = <&scp_mem_reserved>;
>>> + status = "disabled";
>>> + };
>>> +
>>> systimer: timer@10017000 {
>>> compatible = "mediatek,mt8183-timer",
>>> "mediatek,mt6765-timer";
>>> @@ -772,6 +792,22 @@ vencsys: syscon@17000000 {
>>> #clock-cells = <1>;
>>> };
>>>
>>> + vcodec_enc: vcodec@17020000 {
>>> + compatible = "mediatek,mt8183-vcodec-enc";
>>> + reg = <0 0x17020000 0 0x1000>;
>>> + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_LOW>;
>>> + iommus = <&iommu M4U_PORT_VENC_REC>,
>>> + <&iommu M4U_PORT_VENC_BSDMA>,
>>> + <&iommu M4U_PORT_VENC_RD_COMV>,
>>> + <&iommu M4U_PORT_VENC_CUR_LUMA>,
>>> + <&iommu M4U_PORT_VENC_CUR_CHROMA>,
>>> + <&iommu M4U_PORT_VENC_REF_LUMA>,
>>> + <&iommu M4U_PORT_VENC_REF_CHROMA>;
>>> + mediatek,scp = <&scp>;
>>> + clocks = <&vencsys CLK_VENC_VENC>;
>>> + clock-names = "MT_CG_VENC";
>>> + };
>>> +
>>> ipu_conn: syscon@19000000 {
>>> compatible = "mediatek,mt8183-ipu_conn", "syscon";
>>> reg = <0 0x19000000 0 0x1000>;
>>>

\
 
 \ /
  Last update: 2020-08-27 12:24    [W:1.464 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site