Messages in this thread | | | From | Rob Herring <> | Date | Fri, 21 Aug 2020 16:11:22 -0600 | Subject | Re: [PATCH 1/2] dt-bindings: PCI: sprd: Document Unisoc PCIe RC host controller |
| |
On Fri, Aug 21, 2020 at 3:52 AM Hongtao Wu <wuht06@gmail.com> wrote: > > From: Billows Wu <billows.wu@unisoc.com> > > This series adds PCIe bindings for Uisoc SoCs.
typo
> This controller is based on DesignWare PCIe IP. > > Signed-off-by: Billows Wu <billows.wu@unisoc.com> > --- > .../devicetree/bindings/pci/sprd-pcie.yaml | 88 ++++++++++++++++++++++ > 1 file changed, 88 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/sprd-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/sprd-pcie.yaml b/Documentation/devicetree/bindings/pci/sprd-pcie.yaml > new file mode 100644 > index 0000000..6eab4b8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/sprd-pcie.yaml > @@ -0,0 +1,88 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/sprd-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: SoC PCIe Host Controller Device Tree Bindings > + > +maintainers: > + - Billows Wu <billows.wu@unisoc.com> > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + - $ref: "sprd-pcie.yaml#"
Drop this. You don't need to include yourself.
> + > +properties: > + compatible: > + items: > + - const: sprd,pcie > + - const: sprd,pcie-ep > + > + reg: > + minItems: 2 > + maxItems: 3 > + items: > + - description: Controller control and status registers. > + - description: PCIe shadow registers. > + - description: PCIe configuration registers. > + > + reg-names: > + items: > + - const: dbi > + - const: dbi2 > + - const: cfg
'config' is the standard name.
> + > + ranges: > + maxItems: 2 > + > + num-lanes: > + maxItems: 1
maxItems is for arrays and this is not an array. How many lanes are valid?
enum: [ 1, 2, 27?, ... ]
> + description: Number of lanes to use for this port. > + > + num-ib-windows: > + maxItems: 1
Not an array.
> + description: Number of inbound windows to use for this port. > + > + num-ob-windows: > + maxItems: 1
Not an array.
> + description: Number of outbound windows to use for this port. > + > + bus-range: > + description: Range of bus numbers associated with this controller.
Drop if you don't have constraints.
> + > + interrupts: > + maxItems: 1 > + > + interrupt-names: > + maxItems: 1
Need to define the name, though you don't really need this with only 1.
> + > +required: > + - compatible > + - reg > + - reg-names > + - num-lanes > + - ranges > + - bus-range > + - interrupts > + - interrupt-names > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + pcie0@2b100000 { > + compatible = "sprd,pcie", "snps,dw-pcie";
Didn't document "snps,dw-pcie". You'll need a custom 'select' to avoid selecting all instances of "snps,dw-pcie".
> + reg = <0x0 0x2b100000 0x0 0x2000>, > + <0x2 0x00000000 0x0 0x2000>; > + reg-names = "dbi", "config"; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges = <0x01000000 0x0 0x00000000 0x2 0x00002000 0x0 0x00010000 > + 0x03000000 0x0 0x10000000 0x2 0x10000000 0x1 0xefffffff>; > + bus-range = <0 15>; > + num-lanes = <1>; > + num-viewport = <8>; > + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "msi"; > + }; > -- > 2.7.4 >
| |