lkml.org 
[lkml]   [2020]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: dts: BCM5301X: Fix pin controller node
On Wed, 19 Aug 2020 at 06:23, Florian Fainelli <f.fainelli@gmail.com> wrote:
> The pin controller resources start at 0xc0 from the CRU base which is at
> 0x100 from th DMU base, for a final address of 0x1800_c1c0, whereas we
> are currently off by 0x100. The resource size of the CRU is also
> incorrect and should end at 0x248 bytes from 0x100 which is the start
> address. Finally, the compatibility strings defined for the
> pin-controller node should reflect the SoC being used.
>
> Fixes: 9994241ac97c ("ARM: dts: BCM5301X: Describe Northstar pins mux controller")

Let me verify that fix. I'm confused as I believe I got pinctrl
working for uart1 :|

\
 
 \ /
  Last update: 2020-08-19 17:36    [W:0.181 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site