lkml.org 
[lkml]   [2020]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Letux-kernel] [PATCH] omap5: Fix DSI base address and clocks
From
Date
In any case the HDMI bug has reappeared while testing 5.9-rc1, although
I can get the display to work by doing 'modprobe omapdrm' even if HDMI
is enabled (as before it loads automatically if HDMI is disabled).

Best

David

On Wed, 2020-08-19 at 08:58 +0300, Tony Lindgren wrote:
> * H. Nikolaus Schaller <hns@goldelico.com> [200818 09:58]:
> > > Am 18.08.2020 um 11:51 schrieb David Shah <dave@ds0.me>:
> > >
> > > DSI was not probing due to base address off by 0x1000, and
> > > sys_clk
> > > missing.
> > >
> > > With this patch, the Pyra display works if HDMI is disabled in
> > > the
> > > device tree.
> >
> > For me it also works if HDMI is not disabled.
> > So IMHO this comment is misleading.
> >
> > Otherwise,
> >
> > Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
>
> Thanks pushed out into fixes. Looks like I missed removing the
> HDMI disabled comment part but seems like that's not critical
> and don't want to redo the branch after pushing out.
>
> Regards,
>
> Tony
> _______________________________________________
> https://projects.goldelico.com/p/gta04-kernel/
> Letux-kernel mailing list
> Letux-kernel@openphoenux.org
> http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel

\
 
 \ /
  Last update: 2020-08-19 10:58    [W:0.044 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site