lkml.org 
[lkml]   [2020]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3] ARM: dts: omap3: Add cpu trips and cooling map for omap34/36 families
* Adam Ford <aford173@gmail.com> [200818 15:57]:
> Currently, OMAP3_THERMAL is disabled by default, so the bandgap sensor
> is unavailable, and enabling it will somewhat increase power consumption.
> However for boards which operate near their thermal limit, OMAP3_THERMAL
> can be enabled and monitored to keep the processor from either running
> too fast, or shutdown when it's deemed to be operating at an unsafe
> thermal limit at the expense of increased power consumption.
>
> The OMAP3530, OMAP3630, and DM3730 all show thresholds of 90C and 105C
> depending on commercial or extended temperature ratings.
>
> This patch expands the thermal information to include the limits of
> 80C for alert and 90C critical based on commercial temperature rating.
> It sets the coolings-cells for the 34xx and 36xx CPU's which will start
> to throttle back their maximum frequency when the bangap sensor reads
> above the alert temerature of 80C.

Thanks applying into omap-for-v5.10/dt.

Tony

\
 
 \ /
  Last update: 2020-08-19 09:33    [W:0.034 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site